Skip to content
Omnikalc

What size should I cut fabric for an envelope pillow cover?

Get the cutting sizes of the front and the two back pieces of an envelope pillow cover, with seam allowance, hems and overlap, and the fabric length to buy.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

Value out of range

in

Value out of range

Results

Front piece: width

19.0 in

For a plump look, cut the cover about 1 in smaller than the pillow insert

Each back piece: height (same width as the front)

12.5 in

Fabric to buy (15% extra)

1.21 yd

Front piece: height
19.0 in

An envelope pillow cover is one of the easiest sewing projects: a front piece and two overlapping back pieces, with no zipper or buttons. Getting the cutting sizes right is the main step. This calculator gives the size of each piece, including seam allowance, hems and overlap, and the length of fabric to buy.

How the calculation works

  • Front piece = pillow width + 2 × seam allowance by pillow height + 2 × seam allowance
  • Each back piece has the same width as the front, and a height of (pillow height + overlap) ÷ 2 + seam allowance + hem

For an 18 in pillow with 0.5 in seams, a 4 in overlap and 1 in hems:

  • front: 18 + 1 = 19 × 19 in
  • each back: (18 + 4) ÷ 2 + 0.5 + 1 = 19 × 12.5 in

Each cover uses 361 + 2 × 237.5 = 836 square inches of fabric. For 2 covers on 44 in fabric, with 15% extra for layout and pattern matching, buy about 1.2 yd.

Choosing the overlap

  • 3 to 4 in suits most pillows up to about 20 in.
  • 5 to 6 in for large or very plump pillows, so the opening does not gape.
  • Lumbar pillows: the opening usually runs across the short side; enter the width and height accordingly.

Sewing steps

  1. Hem one long edge of each back piece: fold under twice and stitch.
  2. Lay the front right side up.
  3. Place the back pieces right side down on top, hemmed edges toward the middle, overlapping.
  4. Pin and stitch all around at the seam allowance.
  5. Clip the corners, turn right side out and press. Push the corners out gently.

Tips

  • Pre-wash washable fabric to avoid shrinkage after the first wash.
  • Snug fit: for a plump look, many sewists make the cover about 1 in smaller than the insert, for example a 17 in finished cover for an 18 in insert. Enter the smaller size in the calculator.
  • Patterned fabric: center the motif on the front and allow more fabric for matching.
  • Heavier fabrics such as canvas or velvet may need a slightly larger seam allowance.

To estimate fabric for other projects, the fabric yardage calculator works with any rectangular pieces.

Frequently asked questions

What size do I cut for an 18 in envelope pillow cover?

With 0.5 in seams, a 4 in overlap and 1 in hems: a 19 × 19 in front and two 19 × 12.5 in backs.

How much overlap for an envelope pillow cover?

3 to 4 in for most pillows, 5 to 6 in for large or plump ones.

How much fabric for 2 pillow covers of 18 in?

About 1.2 yd of 44 in wide fabric.

Should a pillow cover be smaller than the insert?

Many make it about 1 in smaller for a plump look.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.