Skip to content
Omnikalc

How much does it cost to replace a sewer line?

Enter the pipe length, the replacement price per foot, the camera inspection, the landscaping and driveway restoration and the permit and tap fees: get the pipe cost, the total and the total per foot.

Updated on
Your inputs
ft

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

Results

Total cost

$8,200

Total per ft

$164

Ask for a camera inspection first: trenchless lining or pipe bursting can avoid digging up the yard, and many cities make the owner responsible for the line up to the main; homeowners insurance rarely covers it, but a service line plan may
Pipe replacement
$6,000

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. The sewer line carries wastewater from your house to the city main or to a septic tank. Tree roots, old clay or cast iron pipes, sagging sections and ground movement can crack or block it, causing slow drains, gurgling toilets and sewage backups. Replacing it means digging a trench or using a trenchless method, then restoring the yard or driveway. This calculator adds the pipe, the camera inspection, the restoration and the permits.

How the calculation works

  • Pipe replacement = pipe length × replacement price per foot
  • Total cost = pipe replacement + camera inspection + restoration + permit and tap fees
  • Total per foot = total ÷ pipe length

Replacing 50 ft of sewer line at $120 per foot costs $6,000. A $300 camera inspection, $1,500 of landscaping and driveway restoration and $400 of permit and tap fees bring the total to $8,200, or $164 per foot.

Typical prices

Item Typical price
Sewer camera inspection $150 to $500
Hydro jetting to clear roots $300 to $700
Spot repair of one section $1,000 to $4,000
Traditional trench replacement $50 to $250 per ft
Trenchless pipe lining $80 to $250 per ft
Pipe bursting $60 to $200 per ft
Driveway or sidewalk restoration $1,000 to $5,000

Trench or trenchless?

  • Trench: digs along the full length; cheapest per foot when the line runs under lawn.
  • Pipe lining: inserts a resin liner inside the old pipe; avoids digging but needs a pipe in reasonable shape.
  • Pipe bursting: pulls a new pipe through while breaking the old one; good under driveways and landscaping.

Who pays?

In most cities the homeowner owns the lateral from the house to the main, sometimes including the part under the street. Standard homeowners insurance rarely covers worn-out or root-damaged sewer lines, but an endorsement or a service line protection plan may. Sewer backup coverage pays for damage inside the house, not the pipe itself.

Prevention

Avoid flushing wipes, grease and paper towels, keep trees away from the line, and have the line inspected with a camera before buying an older home. A backwater valve protects the basement from city sewer backups.

Frequently asked questions

How much does it cost to replace a sewer line?

About $8,200 for 50 ft at $120 per foot ($6,000 of pipe work) plus the camera inspection, permit and landscaping, or $164 per foot overall.

Is trenchless sewer replacement cheaper?

It often costs as much per foot but saves on digging and restoring the yard and driveway.

Who pays for the sewer line to the street?

In most US towns the homeowner owns the lateral up to the main; check your local rules.

Does homeowners insurance cover sewer lines?

Usually only with a service line or sewer backup endorsement.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.