Skip to content
Omnikalc

How big should a shower niche be?

Enter the niche width, height and depth, the number of shelves, the shelf thickness and the diameter and height of a typical bottle: get the compartments, the clear height of each, the bottles that fit and the area to waterproof and tile.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

Results

Bottles that fit

8

Area to waterproof and tile

4.3 sq ft

Slope the bottom of the niche slightly toward the shower, waterproof every face and corner before tiling, and size the niche to whole tiles where you can; in a framed wall, a niche usually fits between two studs
Compartments
2
Clear height of each compartment
11.6 in
Bottles per compartment
4

A recessed shower niche keeps shampoo and soap off the floor and out of the way, and it looks far better than a hanging caddy. But it has to be planned before the wall is closed: it must fit between the framing, hold your bottles, and be fully waterproofed. This calculator works out the compartments, the bottles that fit and the area to waterproof and tile.

How the calculation works

  • Compartments = shelves + 1
  • Clear height of each = (niche height − shelves × shelf thickness) ÷ compartments
  • Bottles per compartment = niche width ÷ bottle diameter, rounded down
  • Bottles that fit = bottles per compartment × compartments, if the compartments are taller than the bottles
  • Area to waterproof and tile = back + 2 sides + top and bottom

A niche 14.5 in wide, 24 in high and 3.5 in deep with one shelf 0.75 in thick has 2 compartments about 11.6 in high. Each holds 4 bottles 3 in across, so 8 in total, as long as they are under 11.6 in tall; the default 9 in bottles fit. Lining the back, sides, top and bottom takes about 4.3 sq ft of waterproofing membrane and tile.

Common niche sizes

Niche Width × height Use
Single bay, one opening 14.5 × 12 in 3 or 4 bottles
Single bay with a shelf 14.5 × 24 in 6 to 8 bottles
Double bay (header needed) 30 × 12 in a family shower
Depth 3.5 in in a 2 × 4 wall most bottles

In a wall framed at 16 in on center, the space between two studs is about 14.5 in. A wider niche means cutting a stud and adding a header, which is best avoided on an exterior or load-bearing wall.

Building tips

  • Plan the niche on an interior wall; on an exterior wall it reduces the insulation and can cause condensation.
  • Waterproof every face and corner with the same system as the rest of the shower, sheet membrane or liquid, before tiling.
  • Slope the bottom slightly toward the shower so water does not sit in the niche.
  • Size the opening to whole tiles where you can, or line the niche with a contrasting tile so the cuts look intended.
  • Place it where it is easy to reach, often 48 to 60 in from the floor, and away from the direct spray.
  • Use a solid surface, such as a stone or quartz piece, for the shelf and the sill, since they take the most wear.

Frequently asked questions

What is a standard shower niche size?

About 14.5 in wide, to fit between studs 16 in apart, 12 to 24 in high and 3.5 in deep.

How many bottles fit in a shower niche?

A 14.5 × 24 in niche with one shelf holds about 8 bottles 3 in across, 4 per compartment.

How much tile for a shower niche?

About 4.3 sq ft to line the back, sides, top and bottom of a 14.5 × 24 × 3.5 in niche.

Should a shower niche be sloped?

Yes, slope the bottom slightly toward the shower so water drains out, and waterproof every face first.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.