Skip to content
Omnikalc

How much does a steam shower cost to install and run?

Enter the steam generator, the enclosure and door, the waterproofing and tile, the electrical work, the installation, then the sessions per week, their length, the generator power and your electricity price: get the total cost and the yearly running cost.

Updated on
Your inputs
$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

Value out of range

min

Value out of range

kW

Value out of range

$

Value out of range

Results

Total cost

$8,000

Running cost per year

$66

A steam shower needs a fully sealed enclosure, a sloped ceiling so condensation runs down the walls, a vapor-proof waterproofing membrane and a dedicated 240 V circuit; size the generator to the room volume and the tile, since stone walls need more power

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. A steam shower turns a regular shower into a small steam room. A compact generator, usually hidden in a vanity, closet or attic within about 25 feet, heats water and pipes steam into a fully sealed enclosure. Fans of steam showers like them for relaxation, sore muscles and clearing the sinuses. Unlike a regular shower, the enclosure must be vapor-tight from floor to ceiling. This calculator adds the generator, the enclosure, the waterproofing and tile, the electrical circuit and the installation, then estimates the yearly running cost.

How the calculation works

  • Total cost = steam generator + sealed enclosure and door + waterproofing and tile + electrical circuit + installation
  • Running cost per year = sessions per week × 52 × generator power × minutes ÷ 60 × electricity price

A $1,500 generator, an $1,800 enclosure, $3,000 of waterproofing and tile, a $500 electrical circuit and $1,200 of installation cost $8,000. Three 20-minute sessions a week with a 7.5 kW generator at $0.17 per kWh cost about $66 a year.

Typical prices

Item Typical price
Residential steam generator $1,000 to $3,500
Floor-to-ceiling glass enclosure with steam door $1,500 to $4,000
Vapor-proof membrane and tile $2,000 to $8,000
Dedicated 240 V circuit $300 to $1,000
Installation and plumbing $800 to $2,500
Prefabricated steam shower unit $2,000 to $8,000

Building it right

The enclosure needs a vapor-proof membrane behind the tile, a ceiling sloped about 2 inches per foot so condensation runs down the walls instead of dripping, and a door that seals at the top and bottom. Size the generator to the volume of the enclosure, adding capacity for stone or tile walls and for high ceilings. A bench, a fold-down seat and controls inside the shower make it more comfortable.

Safety and upkeep

Limit sessions to about 15 to 20 minutes, drink water, and check with a doctor if you are pregnant or have heart problems or low blood pressure. Run the bathroom fan afterward to clear moisture from the room. Flush or descale the generator regularly, especially with hard water, which can shorten its life. A steam shower can add appeal when you sell, but it rarely pays back its full cost.

Frequently asked questions

How much does a steam shower cost?

About $8,000 with the generator, enclosure, waterproofing, tile, wiring and installation.

How much does a steam shower cost to run?

About $66 a year for three 20-minute sessions a week.

Can I turn my shower into a steam shower?

Yes, if it can be fully sealed to the ceiling and waterproofed for vapor.

How long should a steam shower session last?

About 15 to 20 minutes.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.