This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. Old toilets can use 3.5 gallons or more per flush, while modern WaterSense toilets use 1.28 gallons or less. Replacing one is a modest job, and the water savings can add up in a busy household. This calculator adds up the cost of new toilets and estimates the water and money saved each year.
How the calculation works
- Total cost = toilets × (toilet + installation + parts + haul-away)
- Cost per toilet = total ÷ toilets
- Water saved per year = flushes per day × 365 × (old gallons per flush − new gallons per flush)
- Savings per year = water saved × water and sewer price per 1,000 gallons
Replacing 2 toilets at $300, with $250 of installation, $25 of parts and $50 of haul-away each, costs $1,250, or $625 per toilet. Going from 3.5 to 1.28 gallons per flush at 16 flushes a day saves about 12,965 gallons a year, worth about $130 at $10 per 1,000 gallons of water and sewer.
Typical prices
| Item | Typical range |
|---|---|
| Basic two-piece toilet | $150 to $350 |
| Comfort-height or one-piece toilet | $300 to $800 |
| Smart or wall-hung toilet | $800 and up |
| Installation by a plumber | $150 to $400 |
| Wax ring, bolts and supply line | $15 to $40 |
Choosing a toilet
- Rough-in: measure from the finished wall to the center of the floor bolts. Most are 12 in, but 10 in and 14 in exist, and the toilet must match.
- Height: comfort-height bowls of 17 to 19 in are easier to sit on and stand up from.
- Bowl shape: elongated bowls are more comfortable; round bowls save space in small bathrooms.
- Flush: look for the WaterSense label and a good MaP rating, which measures how much waste a toilet clears in one flush.
Rebates and payback
Many water utilities offer rebates of $50 to $150 for replacing an old toilet with a WaterSense model. Payback is fastest in large households, in homes with toilets from before 1994, and where water and sewer rates are high. Fixing a leaking flapper, which can waste hundreds of gallons a day, saves money even before you replace anything.
Doing it yourself
Swapping a toilet takes a couple of hours with basic tools: shut off the water, drain the tank, remove the old toilet, set a new wax ring, bolt down the new one and reconnect the supply. Check for soft flooring around the base before setting the new one.