This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional.
An electric bidet seat replaces a standard toilet seat and adds a warm-water wash, a heated seat and often a dryer. It uses electricity every day, mainly to keep the seat and the water warm, and it cuts toilet paper use. This calculator weighs the two and gives the net saving per year and the net cost over the years you keep the seat.
How the calculation works
- Electricity per year = energy per day × 365 × electricity price
- Rolls saved per year = people × rolls per person per week × 52 × share of paper saved
- Paper savings = rolls saved × price per roll
- Net saving per year = paper savings − electricity
- Net cost = purchase and install price + years × (electricity − paper savings)
A seat using 0.4 kWh a day costs about $24.82 a year at $0.17 a kWh. For 3 people using half a roll each a week, cutting paper by 75% saves 58.5 rolls, or $46.80 a year at $0.80 a roll. The net saving is about $21.98 a year, so a $350 seat costs about $130 net over 10 years.
Typical values
| Item | Typical value |
|---|---|
| Energy per day, tank model, heated seat on | 0.5 to 1.5 kWh |
| Energy per day, instant heating, eco mode | 0.2 to 0.5 kWh |
| Toilet paper use | 0.4 to 0.7 rolls per person per week |
| Paper saved | 50% to 80% |
| Seat price | $250 to $800, non-electric attachments from $40 |
What drives the result
- Tank or instant: a tank keeps water warm all day; an instant heater warms it only when used and draws less on average.
- Heated seat: a big share of the power, especially in winter. Timers and eco modes lower it.
- Household size: more people means more paper saved for the same standby use.
- Electricity price: where power is expensive, a non-electric bidet attachment saves paper without any running cost.
Installation
Most seats fit standard round or elongated toilets and connect to the toilet’s water supply with a T-valve. Electric models need a grounded outlet within reach of the cord, ideally protected by a GFCI. If there is none, an electrician can add one, which raises the upfront cost.