Skip to content
Omnikalc

How much lumber for a tree house platform?

Enter the platform width and depth, its height above the ground, the joist spacing and the deck board width: get the area, the joists and their lumber, the decking, the railing and the ladder rungs.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

ft

Value out of range

in

Value out of range

in

Value out of range

Results

Joists

7

Deck board length

136.0 ft

Platform area
64 sq ft
Joist lumber
56.0 ft
Rows of deck boards
17
Railing length (one entry gap)
30.0 ft
Add a railing at least 36 in high, with gaps under 4 in, on every open side
Ladder rungs at 12 in spacing
5
Use a healthy, mature tree, let the tree move with sliding or floating brackets rather than many nails, and check local rules

A tree house starts with a solid, level platform. Before buying lumber, it helps to know how many joists the platform needs, how much decking covers it, how long the railing will be and how many rungs the ladder takes. This calculator works it out from the platform size, its height and your joist spacing.

How the calculation works

  • Area = width × depth
  • Joists = depth ÷ joist spacing, rounded down, + 1, each as long as the platform is wide
  • Rows of decking = depth ÷ (board width + a 1/4 in gap), rounded up, each as long as the platform is wide
  • Railing = perimeter − a 2 ft entry gap
  • Ladder rungs = one every 12 in below the platform

An 8 × 8 ft platform 6 ft up, with joists every 16 in, takes 7 joists (56 ft of lumber) and 17 rows of 5.5 in deck boards, about 136 ft. It needs about 30 ft of railing at least 36 in high and a ladder with 5 rungs.

Sizing guide

Platform Good for
6 × 6 ft a lookout for one or two children
8 × 8 ft a small hut with a roof
10 × 10 ft a room for several children or a reading den

Keep platforms within about 8 ft of the ground for young children, and build bigger rather than higher.

Supporting the platform

  • Choose a healthy, mature hardwood such as oak, maple or beech; avoid trees that are dead, leaning or close to power lines.
  • Use a few large tree attachment bolts rather than many nails or screws, which damage the tree.
  • Let the tree move: use sliding or floating brackets on at least one beam so wind does not tear the platform apart.
  • Add posts or knee braces if one tree cannot carry the load, and size beams for the span.

Safety

  • Fit a railing at least 36 in high on every open side, with gaps under 4 in so a child cannot slip through.
  • Put soft ground cover such as wood chips under the platform and ladder.
  • Inspect bolts, boards and the tree every year, especially after storms.

Rules

Some towns treat tree houses like sheds or decks, with height, size and setback limits, and homeowners’ associations may have their own rules. Check before you build, especially near a property line.

Frequently asked questions

How many joists for an 8 × 8 ft tree house platform?

7 joists at 16 in spacing, about 56 ft of lumber.

How much decking for an 8 × 8 ft platform?

17 rows of 5.5 in boards with 1/4 in gaps, about 136 ft.

How high should a tree house railing be?

At least 36 in, with gaps under 4 in, on every open side.

Should I bolt a tree house to the tree?

Use a few large tree attachment bolts and sliding brackets rather than many nails, so the tree can move and stay healthy.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.