Skip to content
Omnikalc

Passive House savings calculator: how much would a Passive House save on heating?

Enter the floor area, the current heating demand and the fuel price to get the annual energy, cost and CO₂ savings of a Passive House and the payback of the extra cost.

Updated on
Your inputs
ft²

Value out of range

kBtu/ft²/yr

Value out of range

kBtu/ft²/yr

Value out of range

$

Value out of range

$

Value out of range

Results

Heating cost saved each year

$1,058

Heating energy saved each year
70,500 kBtu
Carbon dioxide avoided each year (natural gas)
3,741 kg
Simple payback of the extra cost
23.6 years

High-performance building pays back through lower energy bills. The Passive House savings calculator takes the floor area, the current heating demand, the target demand, the fuel price and the extra cost, and gives the energy saved, the cost saved, the carbon dioxide avoided and the payback time each year.

How the calculation works

  • Enter the heated floor area and the current heating demand of the building per unit of floor area. A typical older US home needs 30 to 60 kBtu/ft² a year.
  • The Passive House standard limits space heating to 15 kWh/m² a year, which is about 4.75 kBtu/ft². Enter this or your target value.
  • Enter the price of heating fuel per therm (100 kBtu), and the extra construction cost of reaching the standard.
  • The calculator shows the energy saved, the cost saved each year, the carbon dioxide avoided (with 53.06 kg of CO₂ per million Btu of natural gas) and the simple payback.

Example

A 2,000 ft² home uses 40 kBtu/ft² a year for heating. A Passive House at 4.75 kBtu/ft² would save 2,000 × 35.25 = 70,500 kBtu a year, worth 70,500 ÷ 100 × $1.50 = $1,058. This avoids 3,741 kg of CO₂. If the Passive House costs $25,000 more, the simple payback is 23.6 years.

Why it matters

Homeowners and builders weighing a high-performance design want a quick estimate of the payoff, and students of building science use such calculations to compare standards.

Good to know

The calculation covers heating only, and it assumes constant fuel prices and a constant gap between the two buildings. Cooling, hot water, electricity use and incentives are not included. Verify the demand figures with an energy model for important decisions.

The energy use intensity calculator measures a building’s energy per area, and the heat loss calculator shows how insulation changes the demand.

Frequently asked questions

What is a Passive House?

It is a building standard that cuts the energy needed for heating and cooling by a very large margin, using high levels of insulation, airtight construction, high-quality windows and mechanical ventilation with heat recovery. The heating demand must not exceed 15 kWh/m² a year.

Does a Passive House need a heating system?

It needs very little. Most of the heat comes from the sun, occupants and appliances. A small heat source, often built into the ventilation system, is enough for cold days. This also lowers the size of the equipment needed.

How reliable is the payback?

It depends heavily on your estimate of the extra cost, which varies by region and builder, and on future energy prices. Energy prices tend to rise, so a payback calculated at today's prices can be conservative. Comfort and air quality benefits are not counted.

Where do I find my current heating demand?

An energy audit gives it directly. Otherwise divide your annual heating energy, in kBtu or kWh, by the heated floor area. Utility bills for the coldest months, with the non-heating baseline subtracted, give a rough estimate.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.