Skip to content
Omnikalc

How do you build a vocal or podcast booth at home?

Enter the inside length, width and height of the booth, the share of walls and ceiling to cover with acoustic panels, the panel size and the air changes per hour: get the floor area, the volume, the panels and the airflow for a quiet fan.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

ft

Value out of range

%

Value out of range

sq ft

Value out of range

Value out of range

Results

Acoustic panels

26

Fan airflow

14.9 CFM

Foam and panels absorb echo inside the booth but do not block outside noise; for isolation you need mass, airtight seams and a solid door, and a small, quiet fan with a baffled duct keeps the booth breathable
Floor area
16 sq ft
Booth volume
112 cu ft

A vocal or podcast booth gives you a small, dead-sounding space where your voice is recorded without the echo of a bare room. You can build one in a closet, frame a small room in a basement or buy a modular booth. This calculator works out the floor area, the volume, the acoustic panels to cover the walls and ceiling, and the airflow a fan needs to keep the booth breathable.

How the calculation works

  • Floor area = inside length × inside width
  • Volume = length × width × height
  • Surface to cover = (walls + ceiling) × share to cover
  • Acoustic panels = surface to cover ÷ area of one panel, rounded up
  • Fan airflow = volume × air changes per hour ÷ 60

A 4 × 4 ft booth 7 ft high has 16 sq ft of floor and 112 cu ft of air. Covering 80% of its walls and ceiling takes 26 panels of 2 × 2 ft. With 8 air changes an hour, a fan needs about 14.9 CFM.

Typical booth sizes

Use Inside size
Voice-over, one person standing 3 × 3 ft to 4 × 4 ft
Podcast, one person seated with a desk 4 × 5 ft to 5 × 6 ft
Podcast, two people facing each other 6 × 8 ft or more
Singer with movement 4 × 6 ft or more

Treatment versus isolation

  • Acoustic treatment with foam or fabric-wrapped panels absorbs reflections inside the booth, so the voice sounds close and dry.
  • Sound isolation keeps outside noise out; it needs mass, such as two layers of drywall, airtight seams and a solid, sealed door.
  • Thicker panels, 2 to 4 in, absorb lower frequencies than thin foam.
  • Very small booths can sound boxy; bass traps in the corners help.

Air and comfort

A sealed booth gets warm and stuffy within minutes. A quiet fan connected to a duct with a few bends, lined with acoustic material, moves air without letting noise in. Use LED lighting, which stays cool, and put the computer outside the booth so its fan noise stays out of the recording.

Simple alternatives

A walk-in closet full of clothes is a surprisingly good vocal booth. Moving blankets hung around a microphone stand also tame echo for very little money.

Frequently asked questions

What size should a vocal booth be?

About 3 × 3 to 4 × 4 ft for one person standing, 4 × 5 ft or more seated with a desk.

How many acoustic panels for a vocal booth?

About 26 panels of 2 × 2 ft to cover 80% of the walls and ceiling of a 4 × 4 × 7 ft booth.

Does acoustic foam soundproof a booth?

No, it reduces echo inside; blocking outside noise needs mass and airtight seams.

How do you ventilate a vocal booth?

A quiet fan of about 14.9 CFM with a baffled duct gives 8 air changes an hour in 112 cu ft.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.