A home workshop starts with a workbench and grows with power tools: a table saw, a miter saw, a drill press, a planer. Each stationary tool needs not only its footprint but space to feed long boards in and take them out. This calculator adds the bench zone, the tool zone and an allowance for circulation, and counts the outlets along the bench.
How the calculation works
- Workbench zone = bench length × (bench depth + clear aisle in front)
- Tool zone = stationary tools × floor per tool, including infeed and outfeed
- Total workshop floor = (bench zone + tool zone) × (1 + circulation allowance)
- Outlets along the bench = bench length ÷ 24 in, rounded up
A 72 × 30 in workbench with a 36 in aisle in front takes 33 sq ft. Two stationary tools at 40 sq ft each add 80 sq ft. With 20% more for walking between them, the workshop needs about 136 sq ft, roughly a single-car garage bay. Plan 3 outlets along the bench.
Floor per tool
| Tool | Typical floor with infeed and outfeed |
|---|---|
| Benchtop tools on a shelf | 10 to 15 sq ft |
| Drill press or band saw | 15 to 25 sq ft |
| Miter saw station | 30 to 60 sq ft along a wall |
| Contractor table saw | 60 to 100 sq ft |
| Planer or jointer | 40 to 80 sq ft |
Saving space
- Put tools on mobile bases and roll them out only when you need them.
- Line up tools so their infeed and outfeed areas overlap, for example a table saw beside the bench at the same height.
- Use the walls for clamps, hand tools and lumber racks.
- A folding or wall-mounted bench suits a garage that still holds a car.
Safety and power
Plan a dedicated 20 A circuit for big tools, with GFCI protection in garages and basements, dust collection or at least a shop vacuum, good lighting of about 75 lumens per square foot, a fire extinguisher and a first aid kit. Keep a clear path from the door to the bench for carrying long boards.