Skip to content
Omnikalc

How high should my workbench be?

Enter your height, the kind of work and the top thickness: get your elbow height, the recommended bench height and the frame height under the top.

Updated on
Your inputs
in

Value out of range

in

Value out of range

Results

Recommended bench height

40 in

Body proportions vary: stand with arms relaxed and check against your own elbow and wrist, and remember shoes add an inch or so
Elbow height, standing
44 in
Frame height under the top
38.6 in

A bench at the wrong height makes you stoop or lift your shoulders for hours. The usual rule ties the height of the top to your elbow height, then adjusts it for the work: higher for fine work you need to see close up, lower for work where you push down with your body weight. This calculator estimates your elbow height from your height and gives the bench and frame heights.

How the calculation works

  • Elbow height ≈ 0.63 × body height
  • Bench height = elbow height + an offset for the work
  • Frame height = bench height − top thickness
Kind of work Offset
Precision work: electronics, carving, model making 2 in above the elbow
General assembly and light work 4 in below the elbow
Heavy work: hand planing, chopping, hammering 8 in below the elbow

For a person 70 in tall, the elbows sit at about 44 in. For general assembly, aim for about 40 in; with a 1.5 in top, build the frame 38.6 in high. For precision work the same person would want about 46 in, and for heavy hand planing about 36 in.

Check against your own body

The 0.63 ratio is an average. Stand in your usual shoes with your arms relaxed and measure from the floor to the underside of your forearm with the elbow bent at 90°. Many woodworkers set a hand-tool bench at the height of their wrist or knuckles with the arms hanging down, which gives a similar result.

Sitting work

For work done seated, the bench should be about elbow height when you sit, usually 28 to 30 in with an ordinary chair, or higher with a drafting stool and footrest.

Making it adjustable

  • Build a little low and add a riser or a second top for fine work.
  • Adjustable legs or a height-adjustable frame suit a shared shop.
  • A bench vise or a bench hook raises small parts closer to your eyes.

Other dimensions

Depth is usually 24 to 30 in, so you can reach the back. Length depends on the work; 6 ft is common for woodworking. A heavy, rigid frame matters more than height for planing, since a wobbling bench wastes effort.

Frequently asked questions

What is the right workbench height for a 70 in tall person?

About 40 in for general work: elbows near 44 in, minus about 4 in.

How do I estimate my elbow height?

About 0.63 times your height, but measuring your own elbow standing in shoes is more accurate.

Should a woodworking bench be lower for planing?

Yes, about 8 in below the elbow, so you can push with your body weight.

How high should a bench for electronics be?

A little above the elbow, about 2 in, so the work is closer to your eyes.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.