A gas bill in the United States shows the use in CCF, but the price is often given per therm, so the two do not line up. This CCF to therms calculator converts the volume with the heat content of the gas, and with the price per therm and the fixed charge it gives the gas bill, the cost per CCF and the energy in therms, MMBtu, kWh and cubic meters.
How the calculation works
- Therms = CCF × the heat content per CCF. One CCF is 100 cubic feet of gas, and one therm is 100,000 BTU, the energy of about 97 cubic feet of natural gas. The heat content on a bill is usually 1.02 to 1.04 therms per CCF.
- Gas bill = therms × the price per therm + the fixed monthly charge. Some bills also add a delivery rate and taxes, so use the total per-therm price.
- MMBtu = therms ÷ 10, and kWh = therms × 29.307, which makes it easy to compare gas with electricity.
- Cubic meters = CCF × 2.832.
Example
A bill shows 45 CCF of gas with a heat content of 1.037 therms per CCF. The energy is 45 × 1.037 = 46.7 therms. At $1.40 per therm plus a $12 fixed charge, the bill is $77.33, or $1.72 per CCF. The same energy is 4.67 MMBtu, 1,368 kWh and 127.4 m³ of gas.
Why it matters
The conversion is needed to check a bill, to compare utilities or gas contracts, to compare the cost of heating with gas and with electricity, and to estimate the effect of a furnace upgrade. It also makes it easy to see how much of a bill is the fixed charge.
Good to know
The heat content of gas changes with the supplier and the month, so use the factor printed on your bill rather than the default. A bill can also include a delivery charge, a rate for the commodity, riders and taxes, so enter the total price per therm if you want the full bill. The energy in the gas is measured on a higher heating value basis, as is usual for billing. The kWh figure is the energy content of the gas and not the heat delivered to the home, which is lower because of the efficiency of the appliance.
Related tools
The electricity cost calculator prices power use, the heating degree days calculator links heat demand to the weather and the energy use intensity calculator rates a building by energy per area.