Skip to content
Omnikalc

Degrees minutes seconds converter: decimal degrees to DMS and DMS to decimal

Convert decimal degrees to degrees, minutes and seconds, or the reverse, for coordinates and angles, with the value in radians.

Updated on
Your inputs
°

Value out of range

°

Value out of range

′

Value out of range

″

Value out of range

Results

Decimal degrees from the degrees, minutes and seconds

48.856667 °

Degrees
40
Minutes
42
Seconds
46.080
Decimal degrees in radians
0.710572 rad

Maps and charts often write angles in degrees, minutes and seconds, and GPS apps use decimal degrees. This degrees, minutes, seconds converter turns decimal degrees into degrees, minutes and seconds, and degrees, minutes and seconds into decimal degrees, and shows the value in radians.

How the calculation works

  • Decimal degrees to degrees, minutes and seconds: the degrees are the whole part of the number. Multiply the decimal part by 60 to get the minutes, keep the whole part, then multiply the new decimal part by 60 to get the seconds.
  • Degrees, minutes and seconds to decimal degrees = degrees + minutes ÷ 60 + seconds ÷ 3,600. For a negative angle, such as a west longitude or a south latitude, the sign applies to the whole result.
  • Radians = decimal degrees × π ÷ 180.
  • One degree has 60 minutes, and one minute has 60 seconds. A second of latitude is about 31 meters, or 101 feet, on the ground.

Example

Convert 40.7128° to degrees, minutes and seconds. The degrees are 40. The decimal part 0.7128 × 60 = 42.768, so the minutes are 42. Then 0.768 × 60 = 46.08 seconds. The result is 40° 42′ 46.08″. In the other direction, 48° 51′ 24″ is 48 + 51 ÷ 60 + 24 ÷ 3,600 = 48.856667°.

Why it matters

Converting by hand is slow and easy to get wrong, especially with negative angles and rounding. The conversion matters for navigation, surveying, astronomy, geocaching and any task that moves coordinates between a paper map and a digital one.

Good to know

Make sure the minutes and seconds stay below 60. A common mistake is to treat 0.5 minutes as 50 seconds, when it is 30 seconds. The sign of a coordinate applies to the degrees, minutes and seconds all together, so −74° 0′ 21.6″ is −74.006°, not −73.994°. For a very small value of degrees the sign of degrees alone does not show, which is why this tool takes the sign from the decimal degrees.

The GPS distance calculator measures the distance between two coordinates and the polar coordinates calculator converts between rectangular and polar forms.

Frequently asked questions

How do I convert decimal degrees to DMS?

Keep the whole number as the degrees. Multiply the decimal part by 60 to get the minutes, and keep its whole part. Multiply what remains by 60 to get the seconds. For 40.7128 you get 40 degrees, 42 minutes and 46.08 seconds. A negative number gives a south latitude or a west longitude.

How do I convert DMS to decimal degrees?

Add the degrees, the minutes divided by 60 and the seconds divided by 3,600. For 48° 51′ 24″ that is 48 + 0.85 + 0.006667 = 48.856667 degrees. This is the format used by web maps and most GPS apps, while paper maps and charts often use degrees, minutes and seconds.

How precise are the seconds?

One second of arc is about 31 meters of north-south distance on the Earth, and one thousandth of a second is about 3 centimeters. East-west distance per second shrinks with the cosine of the latitude. Six decimals of a degree, as in this converter, correspond to about 11 centimeters.

What are the symbols?

The degree sign is °, the minute is the prime ′ and the second is the double prime ″. They are often typed with an apostrophe and a quotation mark, as in 40° 42′ 46″ or 40°42'46". Coordinates also carry N, S, E or W instead of a sign, with N and E positive.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.