Skip to content
Omnikalc

Cooling degree days calculator: measure how hot a month was and estimate the cooling bill

Enter the base temperature, the daily high and low and the number of days to get the cooling degree-days, then estimate the energy and cost of air conditioning.

Updated on
Your inputs
°F

Value out of range

°F

Value out of range

°F

Value out of range

Value out of range

kWh

Value out of range

$

Value out of range

Results

Cooling degree-days

540.0 °F-days

Average daily temperature
83.0 °F
Cooling energy
648 kWh
Cooling cost
$103.68

Weather decides how much you spend on air conditioning. The cooling degree-day adds up how hot the days are above a base temperature. The cooling degree days calculator computes the CDD from the daily high and low and the number of days, and turns it into an estimate of the energy and cost of cooling.

How the calculation works

  • Enter the base temperature, the outdoor temperature above which a building needs cooling: 65 °F (18.3 °C) is the standard in the US.
  • Enter the average daily high and low for the period and the number of days. You can get these from a weather service or from a local record.
  • The calculator computes CDD = max(0, average temperature − base) × days, where the average temperature is (high + low) / 2.
  • Enter the energy your home uses per degree-day and the price to turn the CDD into kWh and cost.

Example

In July, a city has an average high of 92 °F and a low of 74 °F, so the average is 83.0 °F. With a base of 65 °F, each day has 18 degree-days, and 30 days make 540 °F-days. If the house uses 1.2 kWh per degree-day, the cooling needs 648 kWh, which costs $103.68 at $0.16 per kWh.

Why it matters

The calculator helps homeowners to compare summers, to explain a high bill and to estimate the effect of a hot spell on the cooling energy. It also helps energy managers, farms and utilities to compare years and places in a common unit.

Good to know

Cooling degree-days with the simple average method are an approximation, and they ignore the humidity, the sun, the wind and the way the house is used. The energy per degree-day is specific to a house and changes with the efficiency of the air conditioner. The calculator gives an estimate of the cooling electricity and not an exact bill, which also includes the fixed charges and the tariff of the supplier.

The heating degree days calculator is the counterpart for the cold months, the AC size calculator finds the capacity of an air conditioner, the electricity cost calculator prices the energy of an appliance, and the heat index calculator gives the apparent temperature.

Frequently asked questions

What is a cooling degree-day?

A cooling degree-day measures how much, and for how long, the outdoor temperature was above a base temperature. A day with an average of 83 °F and a base of 65 °F counts for 18 CDD. Utilities and energy agencies sum them over a month or a season: the higher the total, the greater the need for air conditioning. They are the summer counterpart of the heating degree-days.

Why is the base temperature 65 °F?

The base of 65 °F (18.3 °C) is the standard in the US because a building at about 70 °F usually needs neither heat nor cooling when the outdoor mean is near 65 °F, after taking into account the heat given off by people and appliances. Modern, well-insulated buildings may have a lower balance point, near 55 °F, and some regions use 24 °C (75 °F) as a base for cooling. Choose the base that fits your building.

How do I find the energy per degree-day of my house?

Divide the electricity used for cooling in a past period by the CDD of the same period. The electric bill of a month in summer, less the base load of lights and appliances, divided by the CDD of the month, gives a number such as 1 to 3 kWh per degree-day for a house in the US. It depends on the size, the insulation, the efficiency of the air conditioner and the habits of the people.

Is the simple average method accurate?

Taking the average of the high and the low is the common approximation, and it is the one used by many weather services. It underestimates the CDD on days when the temperature crosses the base, because it flattens the day. A method that uses hourly temperatures is more accurate, but the difference over a season is usually a few percent.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.