Cheese making turns a gallon of milk into a small block, and how much depends on the milk and on the type of cheese. The cheese yield calculator uses the Van Slyke formula with the amount of milk, its fat and casein and the type of cheese to give the cheese yield, the weight of cheese, the milk needed for a pound and the whey left.
How the calculation works
- Cheese yield (%) = (0.93 × fat + casein − 0.1) × 1.09 ÷ (1 − moisture of the cheese ÷ 100). This is the Van Slyke formula: most of the fat and the casein stay in the curd, and the cheese also holds water, salts and other solids, which the 1.09 factor accounts for.
- Milk weight = gallons × 8.6 lb. Cheese made = milk weight × yield ÷ 100.
- Milk for each pound of cheese = 100 ÷ yield.
- Whey left = milk weight − cheese made, an estimate since some water also leaves in pressing and aging. Whole milk has about 3.7% fat and 2.5% casein.
Example
You use 2 gallons of whole milk (3.7% fat, 2.5% casein) to make cheddar at 37% moisture. The yield is (0.93 × 3.7 + 2.5 − 0.1) × 1.09 ÷ 0.63 = 10.11%. The milk weighs about 17.2 lb, so you get 1.74 lb of cheese, which means 9.9 lb of milk for each pound. About 15.5 lb of whey is left.
Why it matters
Knowing the yield tells you how much milk to buy for a wheel, helps to price homemade cheese and shows why a creamier milk or a moister cheese makes more. It also lets small dairies check their process, since a lower yield than expected points to losses in the vat or the whey.
Good to know
The formula assumes good rennet cheese making. Acid-set cheeses, ricotta and other whey cheeses follow different rules. Use pasteurized milk that has not been ultra-heated, or milk from a source you trust, and keep tools clean. Raw milk cheese carries risks, and some authorities require aging of at least 60 days. The cheese weight is before aging, which dries the cheese and lowers the final weight.
Related tools
The yogurt calculator plans cultured milk and the butter and oil conversion calculator swaps fats in recipes.