Skip to content
Omnikalc

Cold brew coffee calculator: how much coffee for a batch?

Enter the water volume, the brew ratio, the dilution and the serving size to get the amount of coffee grounds, the concentrate you will get, the servings and the overall ratio.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Results

Coarse ground coffee

379 g

Concentrate after straining

38.4 oz

Servings after dilution

9.6

Coarse ground coffee in ounces
13.4 oz
Overall water to coffee ratio
8.0 : 1

Cold brew is made by steeping coarse ground coffee in cold water for many hours, which gives a smooth and low-acid drink. Most home batches are a concentrate that is diluted when served. This cold brew coffee calculator takes the water volume, the brew ratio, the dilution and the serving size to give the coffee grounds needed, the concentrate you will have after straining, the servings and the overall water to coffee ratio.

How the calculation works

  • Coffee = water weight ÷ ratio. Water weighs 1 g per mL, so 64 oz (1,893 mL) at 1 to 5 needs 379 g.
  • Concentrate after straining = water − coffee × 2. Ground coffee holds about twice its weight in water, which stays in the grounds.
  • Servings = concentrate × (1 + water or milk added per part) ÷ serving size.
  • Overall water to coffee ratio = (brewing water + dilution water) ÷ coffee, which is the ratio of the drink you actually serve.

Example

A batch of 64 oz of water at 1 to 5 needs 379 g (13.4 oz) of coarse ground coffee. After straining, the grounds hold 757 g of water, and you get 38.4 oz of concentrate. Diluted 1 to 1, it makes 76.8 oz, or 9.6 servings of 8 oz. The overall water to coffee ratio is 8.0 to 1.

Why it matters

The ratio is the most important setting of a brew, and getting it right saves coffee and avoids a batch that is too strong or too weak. Because the grounds soak up water, the yield is lower than the water used, which surprises many home brewers. The calculation shows how big a batch you need for the number of servings you want.

Good to know

The ratios are by weight, so use a scale for the coffee; a scoop varies with the grind and the roast. The 2-to-1 water absorption is an average, and the real value depends on the grind and the filter. Cold brew concentrate keeps in the refrigerator for about 1 to 2 weeks, and diluted drinks should be consumed within a few days. Taste is personal: start with the ratio given here and adjust the brew ratio or the dilution in small steps. This calculator does not measure the extraction, which depends on temperature, time and grind.

The coffee to water ratio calculator is used for hot brewing, the coffee extraction calculator reads TDS and the extraction yield and the tea brewing calculator gives the leaves and time for tea.

Frequently asked questions

What is the right ratio for cold brew?

For a concentrate, use 1 part of coffee to 4 or 5 parts of water by weight, and dilute it with water or milk when serving. For a ready-to-drink brew, use 1 part of coffee to 8 to 12 parts of water. Stronger ratios give a more intense drink and use more coffee.

How long should cold brew steep?

Most recipes use 12 to 18 hours at room temperature or in the refrigerator, and up to 24 hours at a low temperature. Shorter times give a weak and sour brew, and much longer ones can give a woody or bitter taste.

Why do I get less concentrate than the water I used?

The coffee grounds soak up about twice their weight in water, and that water stays behind when the brew is strained. For 100 g of coffee, about 200 mL of water is kept in the grounds.

What grind should I use?

Use a coarse grind, similar to breadcrumbs or rough sea salt. A fine grind over-extracts, makes the brew muddy and is hard to filter. Strain through a paper filter or a fine mesh to remove sediment.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.