Skip to content
Omnikalc

Wine sulfite calculator: how much metabisulfite to add?

Enter the wine volume, pH and free SO₂ to get the SO₂ needed for a molecular target and the grams of potassium metabisulfite or Campden tablets to add.

Updated on
Your inputs

Value out of range

Value out of range

mg/L

Value out of range

mg/L

Value out of range

Results

Potassium metabisulfite to add

0.99 g

Free SO₂ needed to protect the wine
40.0 mg/L
SO₂ to add
30.0 mg/L
Total SO₂ to add
567 mg
Campden tablets (0.44 g each)
2.2
Molecular SO₂ right now
0.20 mg/L
The wine is below the molecular SO₂ target

Sulfur dioxide is the winemaker’s oldest preservative. It protects against bacteria, wild yeast and oxidation, but only the molecular fraction does the work, and that fraction depends on the pH. This calculator takes the volume of wine, its pH and the free SO₂ you measured, and tells you how much potassium metabisulfite to add to reach a target level of molecular SO₂.

How the calculation works

  • Free SO₂ needed = target molecular SO₂ × (1 + 10^(pH − 1.81))
  • SO₂ to add (mg/L) = free SO₂ needed − current free SO₂ (never below zero)
  • Total SO₂ (mg) = SO₂ to add × volume in litres
  • Potassium metabisulfite (g) = total SO₂ ÷ 1,000 ÷ 0.576
  • Campden tablets = grams ÷ 0.44

The constant 1.81 is the pKa of the equilibrium between molecular and bisulfite SO₂ in wine.

Example

5 gal (18.9 L) of white wine at pH 3.5, with 10 mg/L of free SO₂ and a target of 0.8 mg/L molecular. The factor 1 + 10^(3.5 − 1.81) is 49.98, so the wine needs 40.0 mg/L of free SO₂. You must add 30.0 mg/L, or 567 mg of SO₂ in total. That is 0.99 g of potassium metabisulfite, or about 2.2 Campden tablets. The wine now has only 0.20 mg/L of molecular SO₂, so it is unprotected before the addition.

Why it matters

A fixed dose of 50 mg/L looks safe but protects very differently at pH 3.2 and at pH 3.8. Working from the pH avoids both too little sulfite, which risks spoilage, and too much, which dulls aromas and can bother sulfite-sensitive drinkers. Many commercial winemakers use exactly this calculation after every racking.

Good to know

Free SO₂ falls with time, with oxygen exposure and with every racking, so add after racking and re-test. Some of the SO₂ binds to acetaldehyde, so the total required is larger in a young wine. Dissolve the powder in a little wine before mixing in, and wear a mask: the dust and fumes are irritating. This tool is for hobby winemaking and education.

In practice

Measure the pH and the free SO₂ after fermentation and again before bottling, and keep a log. Add the calculated dose, stir gently without splashing and re-test after 24 hours. If the wine is still low, add a small second dose rather than overshooting.

The homebrew ABV calculator tracks alcohol, the wine cellar calculator plans storage, and the pH calculator handles acids and bases.

Frequently asked questions

Why does the SO₂ dose depend on pH?

Only the molecular form of SO₂ protects wine against microbes and oxidation, and the share that is molecular falls as the pH rises. At pH 3.0 about 6 percent of free SO₂ is molecular, and at pH 3.8 about 1 percent. A higher pH needs a larger dose.

What is the target for molecular SO₂?

A common target is 0.5 mg/L for red wines, 0.8 mg/L for dry whites and rosés, and 1.0 mg/L or more for wines with residual sugar. Some winemakers use a lower level for wines that will be drunk young.

How much potassium metabisulfite gives a given SO₂?

Potassium metabisulfite is about 57.6 percent SO₂ by weight, so 1 gram in 1 litre gives roughly 576 mg/L of SO₂ in theory. In practice, part binds to the wine, which is why the free SO₂ you add rises less than the total.

How do I measure free SO₂?

Use a titration kit (Ripper or aeration-oxidation), or a test strip for a rough value. Measure again a day or two after adding sulfite, since the free level falls as it binds.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.