Skip to content
Omnikalc

Wine chaptalization calculator

Enter the volume of the must, its Brix and the alcohol you want to get the potential alcohol now, the sugar to add, the volume it adds and the final potential alcohol.

Updated on
Your inputs
gal

Value out of range

°Bx

Value out of range

%

Value out of range

g/L

Value out of range

Results

Potential alcohol now

11.4 %

Total sugar to add

1.34 lb

Final potential alcohol

13.0 %

Specific gravity of the must
1.074
Sugar in the must
193 g/L
Sugar to add per liter of must
32.1 g/L
Volume added by the sugar
380 mL

The wine chaptalization calculator gives the potential alcohol of a must from its Brix, the sugar to add to reach the alcohol that you want, the volume that this sugar adds and the final potential alcohol, taking the extra volume into account.

How the calculation works

  • Enter the volume of the must and its Brix, measured with a refractometer or a hydrometer.
  • Enter the alcohol you want and the grams of sugar per percent of alcohol.
  • Read the potential alcohol now, the sugar to add and the final value.

Example

A must of 5 gal at 18 °Bx has a specific gravity of 1.074 and contains 193 g/L of sugar, which is a potential alcohol of 11.4 %. To reach 13 %, you add 32.1 g/L of must, a total of 1.34 lb of sugar. It adds 380 mL of volume, and the final potential alcohol is 13.0 %.

Why it matters

The calculator helps home winemakers, cider and mead makers and students of oenology who harvest grapes that are less ripe than they would like, and want to know how much sugar to add to reach a stable wine of the alcohol that they have chosen.

Good to know

Measure the Brix on the juice after crushing, at the temperature of the instrument, and correct for temperature if needed. Dissolve the sugar in a little warm must before adding it to the batch, and add it in two or three steps during the first days of fermentation to avoid stressing the yeast. The potential alcohol assumes a complete fermentation, which is not always reached, and the practical ratio ranges from 16.8 to 17.5 grams per liter. Do not use the method to hide a very poor harvest, as acidity and flavor still matter. Check the local legal limits for sale.

The homebrew ABV calculator estimates the alcohol of a beer, the hydrometer temperature correction calculator fixes a reading, the refractometer Brix correction calculator converts a reading during fermentation and the wine sulfite calculator doses sulfur dioxide.

Frequently asked questions

What is chaptalization?

Chaptalization is the addition of sugar to the grape must before or during fermentation to raise the final alcohol. It was described by Jean-Antoine Chaptal in the early 19th century. It does not make the wine sweeter, since the yeast turns the added sugar into alcohol. It is used in cool regions where the grapes do not ripen fully.

How much sugar makes 1 percent of alcohol?

Between 16.8 and 17 grams of sugar per liter produce 1 percent of alcohol by volume in practice. The exact figure depends on the yeast and the conditions of the fermentation, which is why the calculator lets you change it. A must of 18 degrees Brix holds about 193 grams of sugar per liter, so a potential alcohol of about 11.4 percent.

Is chaptalization allowed?

It depends on the country and the region. It is permitted in many cool regions of Europe within a limit of added alcohol, forbidden in some warm regions, and regulated in the United States by state and by the winery type. Home winemakers are generally free to do it, but a commercial producer must check the local rules.

Why does the sugar volume matter?

Dissolving sugar increases the volume of the must by about 0.625 milliliter per gram. If you ignore it, the final concentration is slightly lower than the target. The calculator takes it into account, which gives the exact amount to reach the potential alcohol you set.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.