A hot bath feels like a small luxury, and it has a real cost: a tub full of water and the energy to heat it. This calculator estimates both, gives the cost per bath and per year, and compares the water with a shower.
How much water is in a bath?
A standard bathtub holds about 40 to 60 gallons when filled to the overflow, but most people fill it to around 70 to 80%. A 50-gallon tub at 80% uses 40 gallons. Soaking tubs and corner tubs can hold 80 gallons or more.
How much energy does it take to heat?
Heating water takes about 0.00116 kWh per liter per degree Celsius. In US units, that works out to roughly 0.0024 kWh per gallon per °F. Heating 40 gallons from 55 °F tap water to a 104 °F bath, a rise of 49 °F, takes about 4.8 kWh of heat. Divided by a 90% efficient water heater, the energy bought is about 5.3 kWh.
The calculator assumes the bath water is a mix of hot and cold. The share of hot water depends on your heater setting: with a 120 °F tank, about 75% of the bath comes from the heater.
Cost per bath and per year
With electricity at $0.17 per kWh and water and sewer at $10 per 1,000 gallons, the example bath costs about $0.91 in energy and $0.40 in water, about $1.31 in total. At 3 baths a week, that is about $204 a year.
If your water heater runs on gas, enter the gas price per kWh. A therm is 29.3 kWh, so $1.50 per therm is about $0.05 per kWh, which makes a bath much cheaper. A heat pump water heater has an efficiency of 300% or more, which also cuts the cost sharply.
Bath or shower?
At 2 gallons per minute, the bath’s 40 gallons equal a 20-minute shower. A typical 8-minute shower uses about 16 gallons, so it costs less than half as much as a bath. A long shower with an older 2.5 gpm head can use as much as a bath.
Ways to cut the cost
- Fill the tub to two-thirds rather than to the overflow.
- Lower the water heater to 120 °F; the hot share rises but standby losses fall.
- Plug the drain before you turn on the water instead of waiting for it to warm.