Skip to content
Omnikalc

How much concrete for a bird bath, and how much water does it hold?

Enter the basin diameter, the water depth at the center, the bowl thickness, the pedestal height and diameter, the concrete bag yield and the days between refills: get the water it holds, the concrete for the bowl and the pedestal, the bags, the weight and the water per month.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

cu ft

Value out of range

Value out of range

Results

Water it holds

1.12 gal

Concrete bags

3

Concrete for the bowl
0.55 cu ft
Concrete for the pedestal
0.70 cu ft
Total concrete
1.25 cu ft
Weight of the finished bath
181 lb
Water per month
16.8 gal
Give the bowl a gentle slope and a rough surface for grip, empty and scrub it every few days to stop algae and mosquitoes, and place it near shrubs but away from spots where cats can hide

A homemade concrete bird bath is a satisfying weekend project, but it is heavier than most people expect, and its basin must be shallow to suit small birds. This calculator works out the water the basin holds, the concrete for the bowl and the pedestal, the number of bags, the weight of the finished bath and the water you will use refilling it.

How the calculation works

  • Water = volume of a shallow dish, treated as a spherical cap: π × depth × (3 × radius² + depth²) ÷ 6
  • Bowl concrete = π × (radius + thickness)² × (depth + thickness) − the water volume
  • Pedestal concrete = π × pedestal diameter² ÷ 4 × pedestal height
  • Bags = total concrete ÷ yield per bag, rounded up
  • Weight = total concrete × 145 lb per cu ft
  • Water per month = water held × 30 ÷ days between refills

An 18 in basin 2 in deep at the center holds about 1.12 gal. With a 1.5 in thick bowl and a pedestal 24 in high and 8 in across, the bath takes about 1.25 cu ft of concrete: 0.55 for the bowl and 0.70 for the pedestal. That is 3 bags of 0.6 cu ft, and the finished bath weighs about 181 lb. Refilled every 2 days, it uses about 16.8 gal a month.

What birds like

Feature Good practice
Depth 1 to 2 in, shallower at the edge
Surface rough, so feet can grip
Height on the ground or on a pedestal up to about 3 ft
Place near shrubs for cover, but 10 ft or more from spots where cats can hide

Building tips

  • Use a sand mix or a mortar mix for the bowl, which casts smoother than gravel concrete.
  • Shape the bowl over a mound of damp sand or inside a large plastic dish, and keep it damp while it cures for about a week.
  • Cast the pedestal in a cardboard tube and set it on a firm, level base.
  • Rinse the new bath several times before use, because fresh concrete is alkaline.

Keeping it clean

Empty and scrub the bath every two or three days to stop algae and mosquito larvae. In freezing weather, empty it or add a small heater rated for bird baths, since ice can crack the concrete.

Frequently asked questions

How deep should a bird bath be?

1 to 2 in at the center and shallower at the edge, so small birds can stand.

How much water does a bird bath hold?

An 18 in basin 2 in deep at the center holds about 1.12 gal.

How much concrete for a bird bath?

An 18 in bowl 1.5 in thick on a 24 × 8 in pedestal takes about 1.25 cu ft, or 3 bags of 0.6 cu ft.

How heavy is a concrete bird bath?

About 181 lb for 1.25 cu ft of concrete.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.