Choosing a bed is not only about the mattress: the frame, the headboard and the walking space around it decide whether a bedroom feels comfortable or cramped. This calculator checks the clearance on each side and at the foot of a bed centered in your room, and finds the widest standard mattress that still leaves your minimum walkway.
Standard US mattress sizes
- Twin: 38 × 75 in.
- Full (double): 54 × 75 in.
- Queen: 60 × 80 in.
- King: 76 × 80 in.
The frame and headboard add a few inches; the calculator adds 4 in by default to both the width and the length. Platform beds can be nearly flush; sleigh beds can add much more.
Clearance
Designers usually aim for about 24 to 30 in of walking space on each side of the bed and at the foot, 36 in if you can. Leave room for doors and drawers that open into that space.
A queen bed with a 4 in frame is 64 in wide. In an 11 × 12 ft room, the headboard wall is 132 in, leaving (132 − 64) ÷ 2 = 34 in on each side. The bed is 84 in long, leaving 144 − 84 = 60 in at the foot for a dresser or a bench.
With a 24 in walkway on each side, the widest mattress that fits is 132 − 48 − 4 = 80 in, so a king (76 in) would still fit, with exactly 24 in on each side.
Tips
- Measure the doorways and stairs, not only the room, especially for a king box spring.
- Mark the bed outline with painter’s tape on the floor before buying.
- Count the nightstands: a 20 in nightstand needs space beside the bed, so plan for at least that much clearance.
- Small rooms: pushing one side of a twin or full bed against the wall frees a lot of floor space, though the person on the wall side has to climb out.
- Two sleepers: a queen gives each person 30 in, about the width of a crib mattress; couples who want more room choose a king.
The room width here is the wall behind the headboard; if the bed goes on the longer wall, swap the two dimensions.