Skip to content
Omnikalc

How much room does a Murphy bed need?

Enter the mattress width, length and thickness, the clearance you want around the open bed and the ceiling height: get the cabinet width, height and depth, how far the bed reaches when open, the room depth needed and the floor space freed when it is closed.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

Results

Cabinet height

88 in

Room depth needed

120 in

Cabinet width
66 in
Cabinet depth
16 in
Reach from the wall when open
96 in
Floor space freed when closed
36.7 sq ft
The cabinet must be anchored to wall studs or the floor as the maker specifies, since an unanchored bed can tip; leave a power outlet clear and allow space for a nightstand when it is open

A Murphy bed, or wall bed, folds up into a cabinet so a guest room or home office gets its floor back during the day. The catch is that the cabinet is bigger than the mattress and the bed reaches well into the room when it is open. This calculator gives the cabinet size, how far the open bed reaches and the room depth you need.

How the calculation works

  • Cabinet width = mattress width + 6 in for the sides and mechanism
  • Cabinet height = mattress length + 8 in for a vertical (head-up) model
  • Cabinet depth = mattress thickness + 6 in
  • Reach when open = mattress length + cabinet depth
  • Room depth needed = reach + clearance at the foot of the bed
  • Floor space freed = mattress length × cabinet width

A vertical queen bed with a 60 × 80 in, 10 in mattress needs a cabinet about 66 in wide, 88 in tall and 16 in deep. Open, it reaches 96 in from the wall; with 24 in to walk past the foot, the room should be 120 in (10 ft) deep. Folding it away frees about 36.7 sq ft.

Common sizes

Mattress Size Cabinet width (approx.)
Twin 38 × 75 in 44 in
Full 54 × 75 in 60 in
Queen 60 × 80 in 66 in
King 76 × 80 in 82 in

These are rules of thumb: each maker’s cabinet differs by a few inches, so check the spec sheet before you build shelves around it.

Vertical or horizontal?

  • Vertical models open like a door from the head of the bed. They need a tall ceiling (the calculator warns when it is under the cabinet height plus 2 in) but take less wall width.
  • Horizontal models tip sideways. They suit low ceilings, attics and rooms under windows, but take a wall as wide as the bed is long.

Safety and practical tips

  • Anchor the cabinet to wall studs or the floor exactly as the maker says. A loaded bed that is not anchored can tip over.
  • Most mechanisms are made for mattresses 8 to 12 in thick; a heavier mattress can upset the spring or piston balance.
  • Keep an outlet and a light switch reachable when the bed is down, and plan where a nightstand or lamp will go.
  • Leave the bed open now and then so the mattress can air out.

Frequently asked questions

How big is a queen Murphy bed cabinet?

About 66 in wide, 88 in tall and 16 in deep for a 60 × 80 in, 10 in mattress.

How far does a Murphy bed stick out when open?

About the mattress length plus the cabinet depth, so 96 in for a queen.

How deep should a room be for a queen Murphy bed?

About 120 in (10 ft) with 24 in to walk past the foot of the bed.

Do Murphy beds need to be anchored?

Yes, to wall studs or the floor as the maker specifies, because an unanchored bed can tip over.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.