Binoculars are described by two numbers, such as 8×42. The first is the magnification, the second the diameter of each objective lens in millimeters. From these and the field of view, this calculator works out the exit pupil, brightness, twilight factor and the width of the view at 1,000 yards.
Exit pupil
The exit pupil is the objective diameter divided by the magnification: 42 ÷ 8 = 5.25 mm. It is the small disk of light you see in each eyepiece when you hold the binoculars at arm’s length. In daylight, your own pupils shrink to about 2 to 3 mm, so any exit pupil above that looks equally bright. At dusk your pupils open to 5 to 7 mm, and a large exit pupil delivers a brighter image. That is why 7×50 and 8×42 binoculars are favorites for dawn, dusk and stargazing, while compact 8×25 models, with about 3 mm, are best in daylight.
Relative brightness and twilight factor
Relative brightness is the square of the exit pupil: 27.6 for 8×42. It compares the light reaching the eye between models. The twilight factor, the square root of magnification × objective, estimates how much detail you see in dim light: 18.3 for 8×42. Higher magnification raises it even with a small exit pupil.
Field of view
The field of view is often printed in degrees, such as 7.5°, or as a width at 1,000 yards. The width is 2 × 3,000 × tan(angle ÷ 2) in feet: 7.5° covers about 393 ft at 1,000 yards. A wide field makes it easier to find and follow birds or wildlife.
The apparent field of view, the real field times the magnification, describes how wide the image looks in the eyepiece. Above about 60° is considered wide angle.
Choosing binoculars
- Birding and hiking: 8×32 or 8×42, light and bright with a wide field.
- Distant wildlife, open country: 10×42, more detail but a narrower, shakier view.
- Astronomy: 7×50 or 10×50, or larger on a tripod.
- Travel and concerts: compact 8×25 or 10×25.
Magnification above 10× is hard to hold steady by hand. Eyeglass wearers should look for at least 15 mm of eye relief.