A comforter or duvet that is too small leaves the sides of the mattress showing and gets pulled off at night; one that is too big drags on the floor. The right size depends not only on the mattress width but on its thickness, since deep mattresses and toppers need more fabric to cover the sides. This calculator works out the minimum size and the standard size to buy.
The calculation
The comforter should cover the top of the mattress and hang down each side by at least the mattress thickness, plus a little extra drop. For a queen mattress, 60 × 80 in and 12 in thick, with 3 in of extra drop, each side needs 15 in:
- width: 60 + 2 × 15 = 90 in;
- length: 80 + 15 = 95 in, since the comforter only hangs over the foot, not the head.
A standard full/queen comforter, about 90 in wide, fits; for length, look for 92 to 96 in.
Standard US sizes
Sizes vary by brand, but common comforter sizes are:
- Twin: about 66 to 68 × 86 to 90 in.
- Full/queen: about 88 to 90 × 88 to 96 in.
- King: about 104 to 108 × 90 to 96 in.
- Oversized: some brands sell extra-wide or extra-long versions for deep mattresses.
Comforter, duvet or coverlet?
- Comforter: a quilted, filled blanket used on its own.
- Duvet: a filled insert used inside a removable, washable cover; buy the cover in the same size as the insert.
- Coverlet or quilt: thinner, often sized to reach just below the mattress, for layering.
Tips
- Measure the mattress with any topper; pillow-top and hybrid mattresses can be 14 to 16 in thick.
- Couples often choose one size up, for example a king comforter on a queen bed, so that neither sleeper ends up uncovered.
- Bed skirts: if you use one, the comforter only needs to cover the mattress sides, not reach the floor.
- Warmth: choose the fill weight for the season and your room temperature; down is warm for its weight, while synthetic fill is easier to wash.
Check the actual dimensions on the label rather than the size name, since a “queen” can differ by several inches between brands.