Skip to content
Omnikalc

Fabric dye quantity calculator

Enter the dry weight of the fabric, the depth of shade as a percent of its weight and the liquor ratio to get the dye powder, the volume of water, and the salt and soda ash for a fiber-reactive dye bath.

Updated on
Your inputs
oz

Value out of range

%

Value out of range

: 1

Value out of range

oz/gal

Value out of range

oz/gal

Value out of range

Results

Dye powder

4.5 g

Volume of water

1.20 gal

Salt

5 oz

Soda ash

2 oz

Dye powder in teaspoons (about 3 g each)
1.5 tsp
Dye concentration in the bath
1.00 g/L

The fabric dye quantity calculator gives the dye powder, the volume of water, the salt and the soda ash for a fiber-reactive dye bath from the dry weight of the fabric, the depth of shade in percent of its weight and the liquor ratio.

How the calculation works

  • Enter the dry weight of the fabric and the depth of shade in percent of weight (%WOF).
  • Enter the liquor ratio and the salt and soda ash concentrations.
  • Read the dye powder, the water, the salt and the soda ash.

Example

Dyeing 8 oz of fabric to 2 % takes 4.5 g of dye powder, about 1.5 tsp. At a liquor ratio of 20 : 1, the bath needs 1.20 gal of water, with a dye concentration of 1.00 g/L. Add 5 oz of salt and 2 oz of soda ash.

Why it matters

The calculator helps hobby dyers, textile students, costume makers and small studios who dye cotton, linen or rayon with fiber-reactive dyes and want repeatable colors, and who need to scale a recipe from a small swatch to a large batch.

Good to know

Weigh the fabric dry and before dyeing, and weigh the dye powder on a precise scale. Scour new fabric to remove sizing. Dissolve the dye in warm water before adding it, and add the soda ash after the salt and the fabric are in the bath. Wear a mask and gloves when handling dye powder. This calculation is for cellulose fibers with fiber-reactive dye, while wool, silk and synthetics use other dyes and recipes. Keep notes of each batch to repeat the shade.

The hair color mix calculator mixes color for hair, the fabric yardage calculator estimates cloth, the body lotion recipe calculator scales a formula and the soap lye calculator handles another chemical recipe.

Frequently asked questions

What is the depth of shade?

The depth of shade is the weight of dye powder expressed as a percentage of the dry weight of the fabric, written %WOF, for weight of fabric. A pale tint uses 0.1 to 0.5 percent, a medium shade 1 to 2 percent, and a deep color 3 to 6 percent. Black and navy often need 6 percent or more.

What is the liquor ratio?

The liquor ratio is the weight of water for each unit of fabric weight, such as 20:1. A low ratio gives a strong, even bath with less water, while a higher ratio lets the fabric move freely and dye evenly. Fiber-reactive dyeing in a bucket often uses 10:1 to 20:1.

What do salt and soda ash do?

For fiber-reactive dyes on cotton, linen and viscose, salt pushes the dye out of the water and onto the fiber, and soda ash raises the pH so that the dye bonds chemically to the fiber. The quantities shown, about 30 grams of salt and 10 grams of soda ash per liter, are a middle value, and your dye maker may recommend others.

Is the result exact?

No. The shade depends on the dye, the fiber, the temperature and the time. Dye strength differs between brands and batches, and fabric from a mill often contains finishes that resist dye. Always scour the fabric first and dye a test swatch to check the color before the full batch.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.