Glaze recipes are written as percentages so they can be mixed in any quantity. This calculator scales a recipe to the batch you want to mix, adds colorants and opacifiers on top of the base, and estimates the water needed to reach a target specific gravity.
Base and additions
A glaze recipe usually lists base materials that add up to 100, such as feldspar, silica, whiting and kaolin. Colorants and opacifiers such as iron oxide, cobalt carbonate, rutile or zircopax are listed separately as additions, written as “+2%”, and calculated on the weight of the base.
To mix a 1,000 g batch of a 40/20/20/20 base, weigh 400 g, 200 g, 200 g and 200 g. A 2% colorant addition is 2% of 1,000 g, or 20 g, for a total dry weight of 1,020 g. If your base does not add up to exactly 100, the calculator scales each material so the base still equals the batch size and warns you.
Water and specific gravity
Specific gravity (SG) measures how thick a glaze slurry is: the weight of a volume of glaze divided by the weight of the same volume of water. Dipping glazes are often mixed at about 1.40 to 1.50, brushing glazes higher. The calculator uses a typical density for dry glaze materials of about 2.6 g/cm³ and solves for the water:
water = dry weight × (1 − SG ÷ 2.6) ÷ (SG − 1)
For 1,020 g of dry materials and a target SG of 1.45, that is about 1,003 g of water, close to 1 liter. Start with about 80% of that, mix, sieve and measure the SG with a hydrometer or by weighing 100 mL, then add the rest of the water little by little.
Mixing tips
- Wear a well-fitting respirator when handling dry materials, since silica dust is harmful. Wet-clean rather than sweep.
- Add the powder to the water, not the other way round, and let it slake for a few minutes before mixing.
- Sieve through an 80-mesh screen to break up lumps and disperse colorants evenly.
- Label each bucket with the recipe, the date and the SG.
- Test every new batch on a test tile before glazing a full kiln load.
Some materials, such as barium carbonate and some colorants, are toxic; follow the safety data sheets and keep glaze mixing away from food areas.