Skip to content
Omnikalc

Aggregate moisture correction and batch weight calculator

Enter the SSD weights of the mix design, the moisture and absorption of the aggregates and the batch volume to get the batch weights, the free water and the mixing water to add.

Updated on
Your inputs
lb/yd³

Value out of range

lb/yd³

Value out of range

lb/yd³

Value out of range

%

Value out of range

%

Value out of range

%

Value out of range

%

Value out of range

yd³

Value out of range

Results

Mixing water to add per yd³

237.9 lb

Add this water at the batch
Batch weight of coarse aggregate per yd³
1,812 lb
Batch weight of fine aggregate per yd³
1,285 lb
Free water carried by the aggregates
47.1 lb
Coarse aggregate for the batch
9,062 lb
Fine aggregate for the batch
6,423 lb
Water for the batch
143 gal

The aggregate moisture correction calculator converts the saturated surface dry weights of a concrete mix design into the batch weights of wet aggregates, with the free water they carry and the mixing water to add.

How the calculation works

  • Enter the saturated surface dry weights of the coarse and fine aggregates and the mixing water of the mix design.
  • Enter the total moisture content and the absorption of each aggregate, and the volume of the batch.
  • The calculator gives the batch weights of the aggregates, the free water they carry, the mixing water to add and the weights for the whole batch.

Example

A mix design has 1,800 lb of coarse and 1,250 lb of fine aggregate (SSD) and 285 lb of water. The coarse aggregate has a moisture of 1.5 % and an absorption of 0.8 %, the fine 4 % and 1.2 %. The batch weight of the coarse is 1,800 × 1.015 / 1.008 = 1,812 lb and of the fine 1,285 lb. The free water is 47.1 lb, so the mixing water to add is 285 − 47.1 = 237.9 lb per yd³. For 5 yd³ the batch is 9,062 lb of coarse, 6,423 lb of fine and 143 gal of water.

Why it matters

The calculator helps batch plant operators, quality control technicians, ready mix producers and contractors who mix on site to keep the water to cement ratio of the design, and to understand how the weather and the stockpile moisture change a batch.

Good to know

Test the moisture of the aggregates at each batch day and after rain, as a change of 1 % of moisture on 3,000 lb of aggregate moves 30 lb of water, which is a tenth of the water of the mix. Use the absorption from the laboratory test of the same source. When the corrected water is negative the aggregate is too wet for the mix, and the design must be changed. Record the corrected water on the ticket and compare it with the slump at the site to catch an error in the moisture, which is the main cause of variation of the slump from batch to batch.

The concrete yield calculator checks the volume of a batch, the admixture calculator gives the dosage per batch, the concrete volume calculator gives the quantity of a pour and the soil moisture conditioning calculator gives the water to bring a soil to a target moisture.

Frequently asked questions

Why correct the batch weights?

A mix design is written with aggregates in the saturated surface dry (SSD) condition, in which they neither take water from the paste nor give it. Real aggregates are wetter or drier. A wet aggregate weighs more for the same solid material and brings free water, so the batch weight goes up and the water to add goes down. If you do not correct, the water to cement ratio and the strength change.

What is the difference between moisture and absorption?

The total moisture content is the water in the aggregate, in the pores and on the surface, as a percent of the oven dry weight. The absorption is the water that the pores hold at SSD. The free water, which goes into the mix, is the moisture minus the absorption. A negative value means the aggregate is dry and will take water from the paste.

How do I get the moisture?

Dry a sample in an oven or with a hot plate, or use a moisture probe in the bin, and calculate the percent of the dry weight. Test each aggregate on each day or at each change of the weather, as the fine aggregate in a stockpile can change by several percent after rain. Many plants have probes that apply the correction automatically.

What does the calculator leave out?

The calculator leaves out the water in the admixtures and in the ice, the water that comes back with the returned concrete and the wash water, the batch tolerances of the scales and the mix adjustments for the slump. It corrects aggregate moisture only. Check the final water to cementitious ratio with the full water of the mix.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.