Skip to content
Omnikalc

Hard drive random access time calculator

Enter the spindle speed, the average seek time, the transfer rate and the request size to get the average access time, the IOPS and the random throughput of a hard disk.

Updated on
Your inputs
rpm

Value out of range

ms

Value out of range

MB/s

Value out of range

KB

Value out of range

Results

Average access time per request

12.69 ms

Average rotational latency
4.17 ms
Transfer time of the request
0.025 ms
Random operations per second (IOPS)
79
Random throughput
0.32 MB/s
Sequential vs random throughput
508 ×

The hard drive access time calculator gives the average access time, the IOPS and the random throughput of a hard disk from its spindle speed, seek time, transfer rate and request size.

How the calculation works

  • Enter the spindle speed and the average seek time.
  • Enter the sequential transfer rate and the request size.
  • The calculator gives the access time, the rotational latency, the transfer time, the IOPS, the random throughput and the sequential-to-random ratio.

Example

A 7,200 rpm disk has a rotational latency of 30,000 / 7,200 = 4.17 ms. With a seek of 8.5 ms and a 4 KB transfer of 0.025 ms at 160 MB/s, one request takes 12.69 ms. That is 79 IOPS and 0.32 MB/s of random throughput, about 508 times lower than the sequential rate.

Why it matters

The calculator helps system administrators, students and anyone who compares drives to understand the limits of spinning disks and to size storage for databases, virtual machines or backups.

Good to know

Typical figures are 5,400 rpm for laptop drives, 7,200 rpm for desktops and 10,000 or 15,000 rpm for enterprise drives, with average seeks from 4 to 12 ms. A faster spindle cuts the rotational latency, but the seek time often dominates. A solid state drive has no seek or rotation, and delivers tens of thousands of IOPS or more, which is why it replaced hard disks for random workloads. For a RAID array of n disks, the random IOPS roughly add up, with a penalty for writes in RAID 5 or 6. Large requests spend more of the time on transfer, so a request of 1 MB reaches a much higher throughput than a request of 4 KB.

The RAID calculator sizes arrays, the storage IOPS and throughput calculator relates the two measures, the CCTV storage calculator sizes video storage and the bandwidth-delay product calculator covers networks.

Frequently asked questions

What makes up the access time of a hard drive?

Three parts: the seek time to move the head to the right track, the rotational latency to wait for the sector to come under the head, and the transfer time to read the data. On average the latency is half a turn, 60,000 / (2 × rpm) milliseconds.

Why is random access so slow compared with sequential?

Every random request pays the seek and the rotation, around 12 ms, to read a few kilobytes that take a few microseconds to transfer. A sequential read pays them once. That is why a hard disk gives hundreds of megabytes per second sequentially and well under one megabyte per second in small random reads.

What does the estimate leave out?

It ignores the cache of the drive, command queuing, which reorders requests to cut seeks, and the data layout. With a queue of requests the IOPS can be 30 to 50 % higher. It also ignores controller overhead and the faster outer tracks.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.