Skip to content
Omnikalc

How long will your drive take?

Enter the distance, your average speed, how often you stop, the break length and your departure time: get the driving time, the number of breaks, the total trip time and the arrival time.

Updated on
Your inputs

Value out of range

Value out of range

hours

Value out of range

min

Value out of range

Value out of range

Results

Total trip time with breaks

5:30:00

Safety guidance is to take a break at least every two hours of driving

Arrival time

1:30 PM

Driving time
5:00:00
Breaks on the way
2
Days on the road
1

Planning a long drive means more than dividing the distance by the speed limit. Traffic, slower roads and rest stops all add time, and safety agencies recommend a break every two hours. This calculator divides the distance by your average speed, adds the breaks and tells you the total trip time and the clock time you will arrive, given your departure time.

How the calculation works

  • Driving time = distance ÷ average speed
  • Breaks = driving time ÷ interval between breaks, rounded up, minus one (no break is needed at the destination)
  • Total time = driving time + breaks × break length
  • Arrival time = departure time + total time

Example

You drive 300 miles at an average of 60 mph, which takes 5 hours on the road. With a break every 2 hours, you stop 2 times for 15 minutes, which adds half an hour. The total trip takes 5 hours 30 minutes, and leaving at 8:00 AM means arriving at 1:30 PM.

Choosing the average speed

The average speed is always lower than the speed limit. On interstates and motorways, 55 to 65 mph (90 to 105 km/h) is typical in light traffic. On state roads with towns, 40 to 50 mph is more realistic. In cities, 20 to 30 mph is common at rush hour. For a trip with different roads, split it into legs and add the results, or use the overall average from a map application.

Planning a longer journey

A driver should rarely be on the road for more than eight to nine hours in a day. If the trip is longer, plan an overnight stop, and leave extra time for fuel or charging stops, meals and construction. Arriving at the end of a long day also means driving when you are less alert, so avoid scheduling the last leg late at night.

Tips

  • Leave out of the rush hour or add half an hour for it.
  • Allow for time zone changes when you read the arrival time; the calculator shows the local time at your departure.
  • Share the driving on long trips, and stop if you feel sleepy.
  • For electric vehicles, count a charging stop of 20 to 40 minutes every 150 to 250 miles.

This estimate is not a substitute for real-time traffic information.

Frequently asked questions

How do you calculate drive time?

Divide the distance by the average speed, then add the time for breaks.

How often should I take a break when driving?

At least every two hours, for about 15 minutes.

What average speed should I use?

Use the average including traffic and stops, not the speed limit: often 55 to 65 mph on highways.

How long does it take to drive 500 miles?

About 8.5 hours at 60 mph, plus breaks.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.