Skip to content
Omnikalc

How available and reliable is a system with a given MTBF and MTTR?

Enter the MTBF, the MTTR and a mission length: get the availability, the downtime per year, the failures per year, the number of nines and the mission reliability.

Updated on
Your inputs
h

Value out of range

h

Value out of range

h

Value out of range

Results

Availability

99.8004%

Two nines: about 3.7 days of downtime a year
Downtime per year (hours)
17.5
Expected failures per year
4.37
Number of nines
2.70
Probability of no failure during the mission
91.9%

Can you count on a server, a pump or a production line? Two numbers answer that: the MTBF, the average time between failures, and the MTTR, the average time to repair. Together they give the availability, the share of time that the system works. This calculator computes the availability, the downtime per year, the expected failures, the number of “nines” and the reliability over a mission.

How the calculation works

  • Availability = MTBF ÷ (MTBF + MTTR)
  • Downtime per year = (1 − availability) × 8,760 hours
  • Failures per year = 8,760 ÷ (MTBF + MTTR)
  • Number of nines = −log₁₀(1 − availability)
  • Reliability over a mission of t hours = e^(−t ÷ MTBF)

Example

A machine has an MTBF of 2,000 hours and an MTTR of 4 hours. Its availability is 99.80%, about 2.7 nines. It is down for 17.5 hours a year, with 4.4 failures a year. Over a one-week mission (168 hours), the probability of no failure is 91.9%.

Why it matters

Availability targets drive maintenance budgets, spare parts and service contracts. The formula shows two ways to improve: fail less often, or repair faster. Cutting the MTTR in half has the same effect as doubling the MTBF when repairs are short, and is often much cheaper.

Good to know

The formulas assume a constant failure rate and a repair time that is independent of the failure. Real equipment has early failures, wear-out and logistics delays, and planned maintenance also takes machines out of service. For service-level agreements with a monthly target, see the uptime SLA calculator. A system made of several parts in series is available only when all of them are, so its availability is the product of the availabilities of its parts; redundant parts in parallel raise it. A few repeated measurements of repair times are worth more than a single estimate. This tool is for education.

The uptime SLA calculator converts a percentage into allowed downtime, the Little’s law calculator relates work in progress to delivery time, and the server capacity calculator sizes a service.

Frequently asked questions

What are MTBF and MTTR?

MTBF is the mean time between failures of a repairable system, MTTR the mean time needed to repair it. Together they describe how often it fails and how long it stays down.

How is availability computed?

Availability = MTBF ÷ (MTBF + MTTR). It is the share of time the system is working. An MTBF of 2,000 hours and an MTTR of 4 hours give 99.80%.

What does a high MTBF mean for one unit?

MTBF is an average over many units, not a promise for one. A 100,000-hour MTBF does not mean a unit lasts 11 years: it means a fleet of such units would see about one failure per 100,000 operating hours.

How is the mission reliability calculated?

With the exponential model, the probability of no failure over a time t is e^(−t ÷ MTBF). It assumes a constant failure rate, which suits the middle of a component's life, but not early failures or wear-out.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.