Skip to content
Omnikalc

Panorama shots and overlap calculator

Enter the focal length, the sensor size along the pan direction, the angle to cover and the overlap to get the field of view, the rotation between shots, the number of shots and the pixel width of the panorama.

Updated on
Your inputs
mm

Value out of range

mm

Value out of range

°

Value out of range

%

Value out of range

px

Value out of range

Results

Rotation between shots

37.2 °

Number of shots in a row

10

Field of view of one shot
53.1 °
Overlap in degrees
15.9 °
Pixel density
75.3 px/°
Approximate width of the panorama
27,103 px

The panorama shots and overlap calculator gives the field of view of a shot, the rotation between shots, the number of shots needed to cover an angle and the approximate pixel width of the final panorama, from the focal length, the sensor size and the overlap.

How the calculation works

  • Enter the focal length and the sensor size in the pan direction.
  • Enter the angle to cover, the overlap and the pixels of one shot in that direction.
  • Read the field of view, the step, the number of shots and the width.

Example

A lens of 24 mm on a sensor side of 24 mm sees 53.1 °. With an overlap of 30 %, which is 15.9 °, the camera turns 37.2 ° between shots, so covering 360 ° takes 10 shots. With 4000 px per shot, the density is 75.3 px/° and the panorama is about 27,103 px wide.

Why it matters

The calculator helps photographers who shoot landscapes, interiors, virtual tours or high-resolution images by stitching, set the rotation step of a panoramic head, and check how many frames to shoot before leaving the site.

Good to know

Shoot in portrait orientation to gain height, level the tripod, fix the exposure and the white balance manually, and turn the camera by the same step each time, with a panoramic head if you can. Add one more shot to be safe at the end of the row. The width in pixels is an estimate for a rectilinear lens and shrinks after the stitching crops the edges. A wide lens near the edge of the frame stretches objects, so a longer lens often gives a better result for a partial panorama.

The field of view calculator gives the angles of a lens, the crop factor calculator compares formats, the depth of field calculator sets the focus and the time-lapse calculator plans a sequence.

Frequently asked questions

How many photos does a panorama need?

The number of shots depends on the field of view of the lens, the angle to cover and the overlap. A lens that sees 53 degrees with 30 percent overlap advances by about 37 degrees per shot, so a full circle takes 10 shots. A longer lens sees less and needs more photos, but gives more detail in the final image.

How is the field of view computed?

The field of view across one sensor dimension is 2 × arctan(s / (2 × f)), where s is the sensor size in that direction and f the focal length. A camera held in portrait orientation uses the short side of the sensor, 24 mm on a full-frame body, which gives more vertical coverage and a higher final image.

How much overlap is needed?

Stitching software needs common content to align the frames. An overlap of 25 to 35 percent works for most scenes, and 40 to 50 percent helps with a uniform sky, water or foliage. A lens with strong distortion also needs more overlap, because the edges are less reliable.

Does it matter where the camera turns?

Yes. For a scene with objects close to the camera, rotate around the nodal point of the lens, not around the tripod screw, to avoid parallax between frames. For distant landscapes the error is small. A panoramic head moves the camera back so that the lens axis is above the rotation.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.