Skip to content
Omnikalc

Pleated skirt calculator: how much fabric for a pleated skirt?

Enter your hip size, the skirt length, the pleat fullness and the fabric width to get the fabric width needed, the panels, the pleat count and the yardage.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

Results

Fabric to buy

2.25 yd

Fabric width needed across the skirt
114.0 in
Number of pleats
38
Panels cut across the fabric width
3
Length of each panel
27.0 in

A pleated skirt looks simple, but it uses much more fabric than the waist measurement suggests. This pleated skirt calculator takes the hip circumference, the skirt length, the pleat fullness, the fabric width, the allowances and the visible width of a pleat to give the fabric width needed, the number of pleats, the panels, the length of each panel and the fabric to buy.

How the calculation works

  • Fabric width needed = hip circumference × fullness. Knife pleats use about 3 times the hip measurement, because each pleat folds back under itself.
  • Panels = fabric width needed ÷ usable fabric width, rounded up. The panels are cut along the width and sewn side by side.
  • Length of each panel = finished length + hem allowance + waistband allowance.
  • Fabric to buy = panels × length of each panel, rounded up to the next eighth of a yard. The number of pleats is the hip circumference ÷ the visible width of a pleat.

Example

For a hip of 38 in, a skirt 22 in long and knife pleats (3 ×), the width needed is 38 × 3 = 114 in. On 54 in fabric that is ⌈114 ÷ 54⌉ = 3 panels. Each panel is 22 + 2 (hem) + 3 (waistband) = 27 in long. You need 3 × 27 = 81 in, which is 2.25 yd of fabric. With pleats showing 1 in, the skirt has 38 pleats.

Why it matters

Sewers, students and costume makers use the figure to buy the right amount of fabric before they cut. Pleated fabric is costly, and running short can mean that a pattern or dye lot no longer matches.

Good to know

The estimate is for a straight pleated skirt cut in panels along the grain. A skirt that is wider at the hem, a lining, pattern matching and fabric that has a nap or a one-way print will need more. Fabric can shrink, so wash it first. The calculator rounds up and adds nothing for mistakes, so buy a little extra, and always check the layout of your own pattern.

The fabric yardage calculator converts pieces into yards, the curtain size calculator handles pleated and gathered fabric for windows and the circle skirt calculator does the same for flared skirts.

Frequently asked questions

How much fabric does a pleated skirt use?

The width of fabric across the skirt is the hip measurement times the fullness: about 2 times for light pleats and 3 times for knife pleats. That width is cut in panels from the fabric width, and each panel is as long as the skirt plus the hem and the waistband. Pleated skirts use more fabric than gathered skirts of the same length.

What are knife pleats?

Knife pleats are narrow, even pleats that all fold in one direction, so that each pleat covers about two thirds of its width. They need about three times the hip measurement. Box pleats fold in both directions and use a similar amount, and accordion pleats are made by heat-setting a fabric.

Should the panels be cut across or along the fabric?

Cut the length of the skirt along the grain, parallel to the selvage, so that the pleats hang well and the pattern lines up. This is how the calculator counts the panels. Directional prints and plaids need matching, which takes extra fabric.

Why add allowances?

The hem allowance is turned up and sewn so the skirt does not fray, and the waistband allowance is used for the waistband or the facing and the seam. Allowances change with the method, so adjust them to your pattern.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.