Skip to content
Omnikalc

QR code size calculator: how big should your QR code be?

Enter the scanning distance and the length of the link to get the minimum printed width, the QR version, the module size and the farthest reading distance.

Updated on
Your inputs
cm

Value out of range

Value out of range

Value out of range

cm

Value out of range

Results

Minimum printed width, including the quiet zone

10.0 cm

A comfortable size to scan
QR version (size of the grid)
3
Modules per side
29
Module size when printed at that width
2.70 mm
Farthest scanning distance for your printed width
50 cm

A QR code that is too small for the distance simply will not scan. This calculator uses the distance people will scan from, the length of the content and a distance-to-size ratio to give the minimum printed width, the QR version, the modules per side, the size of one module and the farthest distance a code of your chosen width can be read from.

How the calculation works

  • Minimum width = scanning distance ÷ ratio (10 is typical)
  • Version = the smallest QR version that holds your characters at error-correction level M (byte mode)
  • Modules per side = 17 + 4 × version
  • Module size = width ÷ (modules per side + 8 for the quiet zone)
  • Farthest distance = printed width × ratio

Example

A poster link of 40 characters needs version 3, a grid of 29 × 29 modules. To be scanned from 100 cm, it should be at least 10 cm wide including the quiet zone, so each module is 2.7 mm. A code printed 5 cm wide can be read from about 50 cm.

Why it matters

QR codes on posters, packaging and signs are only useful if people can scan them without effort. Checking the size and the density of the code before printing avoids wasting a print run, and shows when a shorter link would help.

Good to know

Contrast, glossy surfaces, curved packaging and print quality all reduce range. Dark modules on a light background scan best. Test every code with several phones before printing in volume, and never put a logo over the corners of the code. Always print a test copy at the real size first, because paper, ink and lighting change how easily a phone can lock on to the code. A shorter link or a lower error correction level also makes the modules larger for the same width.

The photo print size calculator checks resolution, the angle of view calculator relates size to distance, and the aspect ratio calculator scales a layout.

Frequently asked questions

What size should a QR code be?

A common rule is a 10 to 1 ratio between the scanning distance and the code width. A code scanned from 1 meter should be at least 10 centimeters wide, and a business card code scanned from 20 centimeters can be 2 to 3 centimeters.

What is the quiet zone?

It is the empty margin around the code, at least four modules wide, that scanners need to find the edges. Leaving it out is one of the most common reasons a code fails to scan.

Why does a longer link need a bigger code?

More characters need more modules, so each module becomes smaller at the same printed width. Shorten the link with a redirect to keep the code simple and easy to scan.

Which error correction level should I use?

Level M (about 15 percent) is a good default. Higher levels survive damage or a logo in the middle but add modules. This calculator assumes level M and byte mode, a safe estimate for URLs.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.