Skip to content
Omnikalc

How much fabric do I need for binding?

Find the binding length for a quilt or blanket, the number of straight strips across the fabric width, the fabric to buy, and the square needed for continuous bias.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

Results

Binding length needed

290 in

Straight strips across the fabric width

8

Fabric for the strips
20.0 in
In yards
0.56 yd
Square side for continuous bias
28.2 in
Includes 10% for the seams of the continuous tube

Binding finishes the raw edges of a quilt, blanket or placemat with a narrow band of fabric. This calculator finds the binding length you need, the number of strips to cut across the fabric width, the fabric to buy, and the size of square needed if you prefer continuous bias binding.

Binding length

The binding runs all the way around the project, so its length is the perimeter: 2 × (width + length). Add extra for mitering the corners and joining the ends, usually 10 to 20 in. A 60 × 80 in quilt needs 2 × 140 + 10 = 290 in of binding.

Strip width

Double-fold binding for quilts is usually cut 2¼ to 2½ in wide, which gives a finished edge of about ⅜ in once folded and sewn with a ¼ in seam. Use wider strips for thick batting and narrower strips for small projects such as mug rugs.

Straight-grain strips

For straight-edged quilts, most quilters cut strips across the width of the fabric and join them end to end with diagonal seams. Each diagonal seam uses roughly one strip width of length, so the calculator divides the binding length by the fabric width minus one strip width. With 42 in fabric and 2.5 in strips, 290 in takes 8 strips. That is 8 × 2.5 = 20 in of fabric, a little more than half a yard.

Continuous bias binding

Bias binding, cut at 45° to the grain, stretches around curves and wears better on edges, since no single thread runs along the fold. The continuous method sews a square of fabric into a tube and cuts one long spiral strip. The area of the square equals the binding length times the strip width, so its side is the square root of that product. The calculator adds 10% for the seams: for 290 in at 2.5 in wide, a square of about 28.2 in.

Tips

  • Pre-wash the binding fabric along with the quilt top if you pre-wash at all.
  • Press the strip in half lengthwise before sewing, wrong sides together.
  • Start sewing along a side, not at a corner, and leave a 10 in tail to join the ends.
  • Buy a little extra: an eighth of a yard covers a cutting mistake.
  • Scrappy binding from leftover strips is a classic look and uses up stash.

Frequently asked questions

How much binding do I need for a quilt?

The perimeter plus 10 in: 290 in for a 60 × 80 in quilt.

How many strips for quilt binding?

Binding length ÷ (fabric width − strip width): 8 strips of 2.5 in from 42 in fabric.

How wide should binding strips be?

Usually 2¼ to 2½ in for double-fold quilt binding.

What size square makes continuous bias?

The square root of length × width, plus about 10%: 28.2 in for 290 in at 2.5 in.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.