Skip to content
Omnikalc

Rule of twelfths calculator: how much water at a given time?

Enter low and high water, the tide duration and the time since low tide to get the water height by the rule of twelfths, the range and the time to reach your depth.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

hours

Value out of range

hours

Value out of range

ft

Value out of range

Results

Water height by the rule of twelfths

3.84 ft

Not enough water yet at this time
Water height by the cosine curve (smoother check)
3.80 ft
Tidal range
8.00 ft
Share of the tidal range covered
35%
Time after low tide to reach the required height
2.60 hours

Tides do not rise at a steady speed: the water barely moves around slack tide and flows fastest in the middle. The rule of twelfths captures this with simple fractions, and sailors use it to know how much water there will be at a given time between the tide table’s high and low. This calculator gives the height by the rule, a cosine curve for comparison, the tidal range and the time after low water when you will have the depth you need.

How the calculation works

The tide is split into six equal hours (or sixths of the interval between low and high water). In each hour the water rises:

  • 1st hour: 1/12 of the range
  • 2nd hour: 2/12
  • 3rd and 4th hours: 3/12 each
  • 5th hour: 2/12
  • 6th hour: 1/12

So the cumulative fractions are 1, 3, 6, 9, 11 and 12 twelfths. Height = low water + range × fraction covered. The cosine curve uses (1 − cos(180° × time ÷ duration)) ÷ 2 for comparison.

Example

Low water is 1.0 ft, high water 9.0 ft, the interval is 6.2 hours and 2.5 hours have passed since low tide. The range is 8.0 ft. The rule gives a fraction of 35.5 % (2.42 sixths of the tide, between 3 and 6 twelfths), so the water stands at 3.84 ft. The cosine curve gives 3.80 ft. To have 4.0 ft of water you wait about 2.60 hours after low tide.

Why it matters

A boat that draws four feet cannot cross a three-foot bar, and the safe window can be shorter than most people think: in the first hour after low water the tide gives only 1/12 of its range. Knowing that most of the rise happens in the middle two hours lets you time a passage over a shallow channel or plan an anchorage with enough depth at low tide.

Good to know

The rule assumes a symmetric tide of about six hours and ignores wind, atmospheric pressure and river flow, which can change the height by a foot or more. Tidal streams follow the same rule of thumb but with the twelfths shifted. Use official tables for the heights of low and high water and treat the result as an estimate. This tool is for education and is not for navigation.

In practice

Get the time and height of the neighbouring low and high water from a tide table, enter them and the time you plan to cross, and keep a margin of at least a foot above your keel. When the number is close, wait another half hour.

The hull speed calculator gives the displacement speed of a boat, the VMG calculator handles sailing upwind and the moon phase calculator shows the spring and neap cycle.

Frequently asked questions

What is the rule of twelfths?

It is a rule of thumb for how a tide rises or falls between low and high water. The tide moves 1/12 of its range in the first hour, 2/12 in the second, 3/12 in the third and fourth, 2/12 in the fifth and 1/12 in the sixth.

How accurate is it?

It is an approximation that assumes a regular tide of about six hours that follows a sine curve. It works best in open waters with a regular semidiurnal tide, and less well in estuaries, narrow channels or places with a mixed or diurnal tide.

How do I use it for navigation?

Work out the tidal range, find how many hours have passed since low tide and add up the twelfths. The result tells you if there is enough water to cross a bar, enter a harbor or anchor at a given time.

Should I rely on it alone?

No. Use official tide tables or a tide app for the time and height, and treat the rule as a quick check, especially in places where local effects change the shape of the tide. Add a safety margin to the depth you need.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.