The soil test ppm to pounds per acre calculator converts the ppm of phosphorus, potassium and nitrate-nitrogen from a soil test into pounds per acre in the sampled layer, using the real depth and bulk density of the soil, and gives the P2O5 and K2O equivalents.
How the calculation works
- Enter the sampling depth and the bulk density of the soil.
- Enter the ppm of phosphorus, potassium and nitrate-nitrogen from the laboratory report.
- Read the weight of one ppm and the amount of each nutrient in the layer.
Example
A layer of 6 in at 81 lb/ft³ has a soil mass of 1,764,180 lb/ac, so one ppm weighs 1.76 lb per acre. A test of 25 ppm of phosphorus gives 44.1 lb/ac of P, or 101.1 lb/ac of P2O5. Potassium at 150 ppm gives 264.6 lb/ac of K, or 318.8 lb/ac of K2O, and nitrate-nitrogen at 12 ppm gives 21.2 lb/ac.
Why it matters
The calculator helps farmers, gardeners, crop advisers and students who receive a soil test in ppm and want to express it in the units of a fertilizer recommendation, or compare the stock of a nutrient with what a crop removes in the harvest.
Good to know
Use the depth at which the sample was taken, usually 6 to 8 inches for a field crop, and 2 to 3 feet for a nitrate test. Take the bulk density from a measurement or from the soil texture, since it varies from about 1.0 for an organic soil to 1.6 for a compacted sand. The quantity in the layer is not the same as the quantity available: the method of extraction and the local calibration decide how much fertilizer is needed. Nitrate moves with water, so a test taken early in the season can change after a heavy rain. This tool is for conversion, not a fertilizer recommendation.
Related tools
The manure application calculator gives the nutrients added by manure, the lawn fertilizer calculator sets the dose of a bag, the lime application calculator treats acidity and the soil unit weight calculator gives the density of a soil.