Skip to content
Omnikalc

Toothpaste calculator: how long will a tube last?

Enter the tube size, the amount per brushing, the brushings per day and the people to get the days the tube lasts and the cost per month and year.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

$

Value out of range

Results

Days the tube lasts

59.5 days

Cost per month
$2.27
Cost per year
$27.61
Tubes used per year
6.1
Cost per brushing
$0.019

A tube of toothpaste is one of the small household purchases that is bought again and again. This toothpaste calculator takes the size of the tube, the amount per brushing, the brushings per day and the number of people to give the days the tube lasts, the cost per month, the cost per year, the tubes per year and the cost per brushing.

How the calculation works

  • Use per day = amount per brushing × brushings per person × number of people. The amount is in grams.
  • Days the tube lasts = tube size ÷ use per day. A 119 g tube with 2 g used a day lasts about 60 days.
  • Cost per year = price × tubes used per year, where tubes per year = 365 ÷ days the tube lasts.
  • Cost per brushing = price × amount ÷ tube size, a handy figure to compare brands and sizes.

Example

Two people share a 119 g tube that costs $4.50. Each brushes twice a day with about 0.5 g. The use is 0.5 × 2 × 2 = 2 g a day, so the tube lasts 119 ÷ 2 = 59.5 days. That is 6.1 tubes a year, a cost of $2.27 a month or $27.60 a year, and $0.019 per brushing.

Why it matters

Households use the figures to plan a shopping list, to compare a large tube with a small one and to see the real cost of a premium or whitening paste. Parents can use it to show children the right amount, and it is a simple example of unit pricing.

Good to know

The result depends strongly on the amount per brushing, which varies from person to person, and on how much paste stays in the tube. Weights shown on a tube can be in grams or in milliliters, and the density of toothpaste is slightly above that of water, so the two are close but not equal. The calculator estimates the cost of the paste only and does not give dental advice. Follow your dentist about the right paste and the right amount.

The unit price calculator compares products by weight, the cost per wear calculator spreads a purchase over its uses and the subscription cost calculator adds up regular payments.

Frequently asked questions

How much toothpaste should I use?

Dental groups advise a pea-size amount, about 0.25 g, for adults and children over 3 years, and a smear the size of a grain of rice for younger children. A full strip on the brush, as in advertisements, is about 1 g and is more than needed. The fluoride works when it is spread on the teeth and not when there is a lot of foam.

How many times a day should I brush?

Two minutes, twice a day, is the usual advice, in the morning and before bed. Brushing more often adds to the cost and rarely helps the teeth, and brushing too hard can wear the gums. Check the fluoride level in your toothpaste and the advice of your dentist.

Is a bigger tube cheaper?

Often yes per gram, but check the unit price. Compare the cost per brushing in this calculator for two sizes, and remember that a large tube is only a saving if it is used before the end of its shelf life. Special pastes for sensitive teeth or whitening may cost much more per brushing.

Why does my tube seem to run out sooner?

Tubes do not empty fully, and the last 5 to 10% is hard to squeeze out. If the family uses more than a pea-size amount, the tube runs out faster. The calculator gives the theoretical length and you can reduce the tube size by a few percent to allow for waste.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.