Skip to content
Omnikalc

Weaving warp and weft yardage calculator

Enter the width, the ends and picks per unit, the finished length, the shrinkage, the loom waste and the number of pieces to get the number of warp ends, the warp length, the warp and weft yarn needed and their weight.

Updated on
Your inputs
in

Value out of range

/in

Value out of range

in

Value out of range

%

Value out of range

in

Value out of range

Value out of range

Value out of range

/in

Value out of range

%

Value out of range

yd/lb

Value out of range

Results

Number of warp ends

244

Total warp length to wind

3.02 yd

Warp yarn needed

738 yd

Weft yarn needed

573 yd

Length woven on the loom per piece
81.8 in
Total number of picks
982
Warp yarn weight
0.439 lb
Weft yarn weight
0.341 lb
Total yarn weight
0.780 lb

The weaving warp and weft yardage calculator gives the number of warp ends, the warp length to wind, the loom waste, the warp yarn and the weft yarn needed for a woven project, with their weight, from the width, sett, picks per inch, finished length, shrinkage and number of pieces.

How the calculation works

  • Enter the width, the ends per unit and the finished length.
  • Enter the shrinkage, the loom waste, the number of pieces, the picks per unit and the draw-in.
  • Enter the yarn yield and read the ends, the lengths and the weights.

Example

A piece 20 in wide with 12 /in ends has 244 warp ends. For 1 piece(s) of 72 in with 12 % shrinkage, each piece is 81.8 in on the loom and the warp to wind is 3.02 yd. The warp needs 738 yd of yarn (0.439 lb) and, with 12 /in picks, the weft needs 573 yd (0.341 lb), a total of 0.780 lb.

Why it matters

The calculator helps hand weavers, rigid heddle and floor loom users, teachers and craft makers who plan scarves, towels, blankets or yardage, buy the right amount of yarn, and avoid running short in the middle of a project.

Good to know

The sett and the picks per unit depend on the yarn and the structure, so test with a sample. Shrinkage includes take-up and wet finishing and is typically between 10 and 15 percent for cotton and linen. Loom waste includes the part at the front and the back that is tied on and cannot be woven, and fringe if you want one. The draw-in raises the weft length. The yield is for the yarn used, and warp and weft often use different yarns, so repeat the calculation if so.

The knitting time calculator plans another yarn craft, the rug size calculator sizes floor coverings, the quilt size calculator plans bed textiles and the bias binding calculator sizes edge finishing.

Frequently asked questions

How many warp ends do I need?

The number of warp ends is the sett (ends per inch or per centimeter) times the width in the reed, plus any extra selvedge ends. A piece 20 inches wide at 12 ends per inch has 240 ends, and 4 extra selvedge ends make 244. The sett depends on the yarn and the fabric: a plain weave with 8/2 cotton uses about 12 to 20 ends per inch.

How long should the warp be?

The warp must cover the finished length of each piece, the take-up and shrinkage and the loom waste. Take-up comes from the yarn going over and under the weft, and shrinkage from wet finishing, together often 10 to 15 %. A piece finished at 72 inches needs about 82 inches on the loom at 12 %, and the loom waste of 27 inches adds the part that cannot be woven.

How much weft do I need?

The weft yardage is the picks per inch times the woven length times the width, increased by the draw-in, which is the narrowing of the cloth during weaving, usually 3 to 10 %. In the example, 12 picks per inch over 82 inches make 982 picks of 21 inches, or about 573 yards. Add some margin for sampling and for broken ends.

How do I turn yardage into weight?

Divide the yardage by the yield of the yarn, given on the label in yards per pound or meters per kilogram. For example, 8/2 cotton yields about 1680 yards per pound. A warp of 737 yards then weighs about 0.44 pounds. Buy a bit more than computed, and decide the weft and warp yarns separately if they are different.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.