Skip to content
Omnikalc

Takt time calculator: how fast must your line produce?

Enter shift length, breaks, shifts, daily demand and work content to get takt time, the output needed per hour and the minimum number of workstations.

Updated on
Your inputs
minutes

Value out of range

minutes

Value out of range

Value out of range

units

Value out of range

seconds

Value out of range

Results

Takt time

65.3 seconds

Minimum workstations

19

Net available time per day
7.25 hours
Required output per hour
55.2 units
Line balance efficiency
96.8%
Well balanced
Idle time per unit across the line
39.8 seconds

Takt time is the heartbeat of a lean production line, and it comes from demand rather than from what the line can do. This takt time calculator turns your shift length, breaks and daily demand into the takt time and the units needed per hour, then uses the work content per unit to estimate the minimum workstations and the line balance efficiency.

How the calculation works

  • Net available time = (shift length − breaks) × shifts per day.
  • Takt time = net available time ÷ customer demand.
  • Required output per hour = 3,600 ÷ takt time.
  • Minimum workstations = total work content ÷ takt time, rounded up.
  • Balance efficiency = work content ÷ (stations × takt time).

Example

A plant works one 480 minute shift with 45 minutes of breaks, which leaves 26,100 seconds (7.25 hours). Demand is 400 units a day, so the takt time is 65.25 seconds and the line must produce 55.2 units an hour. A product with 1,200 seconds of work needs at least 19 workstations, at a balance efficiency of about 96.8 %.

Why it matters

A line that runs faster than takt builds inventory that nobody ordered, and one that runs slower misses orders and needs overtime. Computing takt time first sets a clear target for every station, shows how many people or machines the product needs and exposes the idle time that hides in an unbalanced line.

Good to know

Use the demand rate for the period you plan, for example the monthly forecast divided by working days, and recalculate when demand changes. Net available time excludes breaks, meetings and planned maintenance, but not unplanned stops. The station count assumes the work can be split perfectly, which is rarely true, so the actual number is often higher than the minimum. Takt time works best for repetitive production, and for mixed products you should use the weighted work content of the mix.

The labor productivity calculator measures output per hour, the team capacity calculator plans sprint hours, and the inventory turnover calculator shows how fast stock moves.

Frequently asked questions

What is takt time?

The pace at which you must produce to meet customer demand. It equals net available time divided by demand.

How is takt time different from cycle time?

Takt time is set by demand, while cycle time is how long a process actually takes. Cycle time should not exceed takt time.

Why does line balance matter?

If stations have unequal work, the slowest one limits the line and the others wait. Efficiency shows how much of the paid time is used.

Should I include changeovers and downtime?

Remove planned stops from the available time, and treat unplanned downtime separately, for example with OEE.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.