Skip to content
Omnikalc

What interest rate does the Taylor rule suggest?

Enter the neutral real rate, inflation, the inflation target, the output gap and the current policy rate: get the Taylor rule rate, the implied real rate and the gap with the actual rate.

Updated on
Your inputs
%

Value out of range

%

Value out of range

%

Value out of range

%

Value out of range

%

Value out of range

Results

Rate suggested by the Taylor rule

5.30%

Implied real policy rate
2.10%
Suggested rate minus current rate
0.80 points
The rule suggests a higher rate than the current one: policy looks too loose

The Taylor rule is a simple formula that suggests where a central bank should set its policy interest rate. It raises the rate when inflation is above target or the economy is running above its potential, and lowers it in the opposite case. It was proposed by economist John Taylor in 1993 and is still widely used as a benchmark to judge whether monetary policy is tight or loose.

How the calculation works

Rate = r* + inflation + 0.5 × (inflation − target) + 0.5 × output gap

  • r* is the neutral real interest rate, the rate that neither stimulates nor slows the economy
  • The inflation term is added so that the real rate follows the rule
  • The two 0.5 weights give equal importance to inflation and to output

Example

With a neutral real rate of 2%, inflation of 3.2%, a target of 2% and an output gap of −1%, the rule gives 2 + 3.2 + 0.5 × 1.2 + 0.5 × (−1) = 5.3%. The implied real rate is 2.1%. Against a current policy rate of 4.5%, the rule suggests a rate 0.8 points higher, which hints that policy may be too loose.

Reading the result

The gap between the rule and the actual rate is a rough measure of how restrictive policy is. Central banks may deliberately differ from the rule, for example in a crisis or when inflation is expected to fall. Alternative versions put a larger weight on the output gap or add smoothing, so treat the figure as one reference point and not a prescription.

Uncertainty

Both r* and the output gap cannot be observed directly, and estimates differ by a point or more. Changing r* by one point moves the result by one point, so test several values. A rule is a useful tool for discussion, but it cannot replace judgment about financial stability and supply shocks.

Frequently asked questions

What is the Taylor rule?

A guideline for central banks: set the policy rate from the neutral rate, current inflation, the gap between inflation and its target and the output gap.

What are the coefficients?

The classic 1993 version weights the inflation gap and the output gap by 0.5 each, as used here.

Is it a forecast of what the central bank will do?

No. It is a benchmark. Central banks look at many other factors and rarely follow it exactly.

How is the output gap measured?

As the percentage difference between actual and potential output, estimated by economists and revised often.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.