Skip to content
Omnikalc

Taylor tool life calculator: how long does a cutting tool last at your cutting speed?

Enter the Taylor constants and the cutting speed to get the tool life, the speed for a target life and the parts per cutting edge.

Updated on
Your inputs

Value out of range

ft/min

Value out of range

ft/min

Value out of range

min

Value out of range

min

Value out of range

Results

Tool life at the cutting speed

25.6 min

Practical tool life
Cutting speed for the target tool life
323.4 ft/min
Change in tool life for a 10 % higher speed
-31.7 %
Parts per tool edge
17.1

Cutting too fast wears the tool out quickly, and cutting too slowly wastes machine time, and Taylor’s equation sets the trade-off. The Taylor tool life calculator takes the Taylor exponent, the constant C, the cutting speed, a target tool life and the machining time per part, and gives the tool life at your speed, the speed for the target life, the change in life for a 10 % higher speed and the parts per cutting edge.

How the calculation works

  • Enter the Taylor exponent n and the constant C of the tool and workpiece pair. Typical values of n are 0.1 to 0.15 for high-speed steel, 0.2 to 0.25 for carbide and 0.4 to 0.6 for ceramics.
  • Enter the cutting speed you plan to use.
  • Taylor’s tool life equation is V × T^n = C, so the tool life is T = (C / V)^(1/n).
  • Enter a target tool life to find the speed that gives it, and the machining time per part to find the number of parts per cutting edge.

Example

A carbide tool has n = 0.25 and C = 900 ft/min. At 400 ft/min, the tool life is (900 / 400)^4 = 25.6 min. To get a life of 60 min, the speed must drop to 900 / 60^0.25 = 323 ft/min. A speed 10 % higher would cut the life by 31.7 %. With 1.5 min per part, one cutting edge makes about 17.1 parts.

Why it matters

Tooling is a major cost in a machine shop, and tool life is very sensitive to the cutting speed. A quick calculation helps to choose a speed for a target life, to plan tool changes between parts and to see what an increase of speed to gain productivity would cost in tooling.

Good to know

The equation holds within a range of speeds, for a fixed feed, depth of cut, coolant and wear criterion, and the constants are specific to the tool and workpiece. At very low and very high speeds, the law fails. Use constants from tests or from the tool maker, and check them in practice. The result is an estimate and the real tool life varies by 20 % or more.

The cutting speed calculator converts between surface speed and spindle speed, the milling feed rate calculator sets the table feed, the tap drill size calculator picks the drill for a thread, and the metal weight calculator finds the mass of stock.

Frequently asked questions

What is Taylor's tool life equation?

It is the empirical law V T^n = C, which links the cutting speed V and the tool life T, found by Frederick W. Taylor in the early 1900s. The constants n and C depend on the tool material, the workpiece material, the feed, the depth of cut and the coolant. It is the basis of machining economics.

How sensitive is tool life to speed?

Very sensitive. With n = 0.25, a speed 10 % higher cuts the life by about 32 %, and a speed 20 % higher cuts it by about 52 %. For high-speed steel, with n near 0.125, the effect is even bigger. This is why small changes of speed have a large effect on tooling cost, and why slower can be cheaper.

How do I find n and C?

From a pair of tool-life tests at two different speeds. Plot the speed against the tool life on log-log paper, and the slope gives -n and the intercept at 1 min gives C. Tool makers also publish ranges of n and C for each grade. Use the same wear criterion for the tests, usually 0.3 mm of flank wear.

What is the economic tool life?

The speed that gives the lowest cost per part is not the one with the longest tool life. It balances the cost of the tool and the time to change it against the machining time. A common result is a tool life of 15 to 60 minutes. The calculator gives the speed for any target, so you can compare options.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.