Skip to content
Omnikalc

How many tubes does a bug hotel need?

Enter the front width and height of the frame, its depth, the share of the front filled with tubes and the average tube diameter: get the number of tubes, the stem length to cut, the filler volume for the rest and the frame boards.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

%

Value out of range

in

Value out of range

Results

Tubes or stems

921

Stem length to cut

460.5 ft

Filler for the rest (cones, bark, straw)
0.30 cu ft
Frame boards (perimeter)
5.0 ft
Mix hole sizes from about 1/8 to 3/8 in, close the back, add a roof overhang and hang it in a sunny, sheltered spot near flowers

A bug hotel gives solitary bees, wasps, lacewings and beetles somewhere to nest and shelter. Most of the useful space is in the tubes: hollow stems, bamboo or holes drilled in untreated wood, where mason bees and leafcutter bees lay their eggs. The rest of the frame can be packed with pine cones, bark, straw or rolled cardboard. This calculator estimates how many tubes fit in the front of your frame and how much material to collect.

How the calculation works

  • Tubes = front width × front height × share filled ÷ (tube diameter²), rounded down, assuming tubes packed in a square grid
  • Stem length to cut = tubes × depth of the frame
  • Filler = front area × depth × the share not used by tubes
  • Frame boards = perimeter of the front, 2 × (width + height)

A 12 × 18 in frame 6 in deep, with 60% of the front in tubes of 3/8 in, holds about 921 tubes. That means about 460.5 ft of stems cut to length, plus about 0.30 cu ft of filler for the rest and 5 ft of board for the frame.

Tube sizes

Inside hole Typical users
1/8 to 1/4 in small solitary bees and wasps
5/16 in mason bees
3/8 in larger mason and leafcutter bees

Mixing sizes attracts a wider range of insects. Tubes about 6 in deep suit mason bees, and holes should be closed at the back.

Building tips

  • Use untreated wood and natural stems; avoid plastic straws, which trap moisture and mold.
  • Cut stems cleanly just past a node so one end stays closed, and sand drilled holes smooth so wings are not torn.
  • Give the hotel a roof that overhangs the front by a couple of inches to keep rain off.
  • Fix it firmly at chest height or higher, facing the morning sun, sheltered from wind and close to flowers.

Keep it healthy

Large hotels packed with hundreds of tubes can spread parasites and fungus between nests. Several small hotels are better than one huge one, and replacing or cleaning tubes every two or three years keeps them safe. Plant flowers that bloom from early spring to fall so the insects have food nearby, and avoid pesticides in the garden.

Frequently asked questions

How many tubes fit in a 12 × 18 in bug hotel?

About 921 tubes of 3/8 in when 60% of the front is filled with tubes.

What hole sizes should a bug hotel have?

A mix from about 1/8 to 3/8 in across, closed at the back.

How deep should bug hotel tubes be?

About 6 in for mason bees; shallower holes suit smaller insects.

Where should I hang a bug hotel?

In a sunny, sheltered spot facing the morning sun, at chest height or higher, close to flowers.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.