Skip to content
Omnikalc

Base excess calculator

Enter the pH and the pCO2 of an arterial blood gas and the hemoglobin to get the calculated bicarbonate and the base excess.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs

Value out of range

mmHg

Value out of range

g/dL

Value out of range

Results

Base excess

-9.6 mmol/L

Calculated bicarbonate
15.6 mmol/L
Base excess with a hemoglobin of 15 g/dL
-9.3 mmol/L
Bicarbonate difference from 24 mmol/L
-8.4 mmol/L
Metabolic status (−1 base deficit, 0 normal, 1 base excess)
-1

The base excess calculator gives the calculated bicarbonate, the base excess at the chosen hemoglobin and at 15 g/dL, the bicarbonate difference from normal and the metabolic status from the pH and the pCO2 of a blood gas.

How the calculation works

  • Enter the arterial pH and the pCO2 in mmHg.
  • Enter the hemoglobin: 5 g/dL gives the standard base excess.
  • Read the bicarbonate and the base excess, and the metabolic status.

Example

A pH of 7.3 with a pCO2 of 32 mmHg mmHg gives a bicarbonate of 15.6 mmol/L, which is -8.4 mmol/L from 24. The base excess is -9.6 mmol/L (and -9.3 mmol/L with 15 g/dL of hemoglobin), a status of -1, which is a base deficit.

Why it matters

The calculator helps students of medicine, nursing and respiratory therapy who learn to read blood gases, and clinicians who want to check the base excess printed by an analyzer or separate the metabolic from the respiratory part of a disorder.

Good to know

This tool is for learning and checking, not for treatment decisions. The base excess is valid for arterial blood at 37 °C, and the analyzer corrects for the temperature of the patient and other factors. Pair it with the anion gap and the clinical context to find the cause of an acidosis, and with the expected compensation to see if a second disorder is present. A normal base excess does not exclude a mixed disorder in which an acidosis and an alkalosis cancel out. In severe cases, the team follows the trend of the values and not a single number.

The Henderson–Hasselbalch calculator links pH, bicarbonate and pCO2, the anion gap calculator helps find the cause of an acidosis, the delta gap calculator detects a mixed disorder and the bicarbonate deficit calculator estimates the base needed.

Frequently asked questions

What is the base excess?

The base excess is the amount of strong acid or base, in mmol/L, needed to bring a litre of blood back to a pH of 7.40 at a pCO2 of 40 mmHg and 37 °C. It isolates the metabolic part of an acid–base disorder, since it does not depend on the carbon dioxide of the breath. A negative value is called a base deficit.

What is the normal range?

The usual reference range is −2 to +2 mmol/L. A value under −2 points to a metabolic acidosis, as in lactic acidosis or ketoacidosis, and a value above +2 to a metabolic alkalosis. The base excess is a guide to the size of the metabolic disturbance and to the amount of base that may be needed.

Which formula does the calculator use?

It computes the bicarbonate from the Henderson–Hasselbalch equation, HCO3 = 0.0307 × pCO2 × 10^(pH − 6.1), then applies the Van Slyke equation: BE = (1 − 0.014 Hb) × [(HCO3 − 24.4) + (2.3 × Hb(mmol/L) + 7.7) × (pH − 7.4)]. With a hemoglobin of 5 g/dL this gives the standard, or extracellular, base excess, about 0.93 × [(HCO3 − 24.4) + 14.8 × (pH − 7.4)].

Does it replace the value on the analyzer?

No. The blood gas analyzer computes the base excess with its own validated algorithm, and the result can differ by a point or two. Use this calculator to understand the number or to check a value, and treat the patient with the clinical picture and with the advice of the medical team.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.