Skip to content
Omnikalc

Continuous infusion calculator: what rate holds a target concentration?

Enter the clearance, the target concentration and the volume of distribution to get the infusion rate, the loading dose and how fast steady state is approached.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

Results

Infusion rate (mg/h)

75.00

Loading dose (mg)
600.0
Half-life (hours)
5.55
Share of steady state reached at that time
52.8 %
Concentration at that time, without a loading dose (mg/L)
7.91
Time to reach 95 % of steady state (hours)
24.0

This calculator is for general information and education. It is not medical advice and does not replace the advice of your doctor or a registered dietitian.

A continuous infusion aims to hold a drug at a steady concentration. The continuous infusion steady-state calculator takes the clearance, the target concentration, the volume of distribution, the active fraction and a time, and gives the infusion rate, the loading dose, the half-life, the share of steady state reached, the concentration at that time and the time to 95 %.

How the calculation works

  • At steady state the infusion rate equals the elimination rate, so rate = clearance × target concentration ÷ f, where f is the active fraction of the dose.
  • A loading dose fills the volume of distribution at once: loading dose = target × Vd ÷ f.
  • Without a loading dose, the concentration rises as C(t) = Css × (1 − e^(−k × t)), with k = CL ÷ Vd. The half-life is ln 2 ÷ k.
  • The infusion reaches 50 % of steady state after one half-life, 90 % after 3.3 and 95 % after 4.3 half-lives, whatever the rate.

Example

A drug with a clearance of 5 L/h and a volume of distribution of 40 L is to be held at 15 mg/L. The infusion rate is 5 × 15 = 75 mg/h and the loading dose is 15 × 40 = 600 mg. With k = 0.125 per hour, the half-life is 5.55 hours. After 6 hours without loading, 52.8 % of steady state is reached, which is 7.91 mg/L, and 95 % takes about 24 hours.

Why it matters

Intravenous infusions are common in hospitals for drugs that need a stable level. This calculation shows the relation between clearance, rate and target, and why the time to reach the plateau is a property of the drug, not of the rate chosen.

Good to know

The model has one compartment and constant clearance, which holds for many drugs only over a range of concentrations. It does not cover nonlinear drugs, such as phenytoin, or changing organ function. It is for learning, and real infusion rates are set by a clinician.

The half-life calculator follows decay over time, and the glucose infusion rate calculator covers a different infusion calculation.

Frequently asked questions

How is the infusion rate worked out?

At steady state the drug going in each hour equals the drug the body removes each hour. The body removes the clearance times the concentration, so the rate needed is the clearance multiplied by the target concentration. The active fraction corrects for salt forms or incomplete absorption.

Why is a loading dose useful?

Starting an infusion without a loading dose means waiting several half-lives for the level to build. For drugs with a long half-life this can take a day or more. A loading dose brings the concentration to the target at the start, and the infusion then holds it there.

Does a faster infusion reach steady state sooner?

No. Doubling the rate doubles the steady-state concentration but does not shorten the time to reach it. That time depends only on the half-life, so a loading dose is the only way to get to the target level early.

What happens if clearance drops?

If clearance falls, for example in kidney or liver disease, the same rate gives a higher steady-state level and takes longer to reach it. That is why infusion rates for many drugs are reduced in these patients, using adjusted clearance values.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.