Skip to content
Omnikalc

Low vision Kestenbaum magnification calculator

Enter the Snellen denominator of the current acuity and of the acuity needed for the task to get the decimal acuity, the logMAR, the Kestenbaum add, the working distance, the magnification required and the dioptric power of a magnifier.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs

Value out of range

Value out of range

Results

Kestenbaum add (reciprocal of the decimal acuity)

5.00 D

A strong add: a close working distance, a stand magnifier or high add glasses may be used
Decimal acuity
0.20
LogMAR
0.70
Working distance for the add
20.0 cm
Magnification required (current / needed)
2.5 ×
Approximate magnifier power (4 × magnification)
10 D

The low vision magnification calculator gives the Kestenbaum add, the working distance, the magnification required and the approximate power of a magnifier from the current acuity and the acuity needed for a task.

How the calculation works

  • Enter the denominator of the current Snellen acuity.
  • Enter the denominator of the acuity needed for the task.
  • Read the add, the distance and the magnification.

Example

An acuity of 20/100 is a decimal 0.20 and a logMAR of 0.70. The Kestenbaum add is 100 / 20 = 5.00 D, so the working distance is 100 / 5.00 = 20.0 cm. To read an acuity of 20/40, the magnification needed is 100 / 40 = 2.5×, which a magnifier of about 4 × 2.5 = 10 D can give.

Why it matters

The calculator helps low vision therapists, optometry students, occupational therapists and relatives of people with a visual impairment who want to understand the magnification needed for reading.

Good to know

The rule gives a first estimate because the real need depends on the print size, which is often much larger than the acuity limit, with most people reading comfortably at a print size two to three times their threshold size. The result also supposes that the near acuity is the same as the distance acuity, which is not true for people with a central scotoma, in whom the acuity can differ with the lighting and the contrast. Magnification can be obtained by getting closer, called relative distance magnification, by enlarging the print, by using a telescope or a magnifier, or by electronic enlargement, and the options trade off field of view, working distance and reading speed. Good lighting, contrast and glare control are as important as magnification, and training improves the reading speed. A person with a recent loss of vision may be offered rehabilitation services, and the aids should be chosen with a specialist.

The visual acuity calculator converts the notations used here, the retinal illuminance calculator treats the light, the contrast sensitivity calculator treats contrast and the Hofstetter calculator treats accommodation.

Frequently asked questions

What is the Kestenbaum rule?

It estimates the reading add of a person with low vision as the reciprocal of the decimal distance acuity. A person at 20/200 (decimal 0.1) starts with an add of +10 D, at a working distance of 10 cm. It is a starting point to be adjusted.

How is the magnification related to the power?

The conventional magnification of a hand magnifier is its power divided by 4, taking 25 cm as the reference distance. So a 12 D magnifier gives 3×. The rule works for the usual, simple use of a magnifier held close to the eye.

Is the result a prescription?

No. A low vision specialist chooses the aids from the task, the contrast, the field of view, the lighting, the hand steadiness and the preferences of the person. Several devices, including electronic magnifiers, may be tried.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.