Skip to content
Omnikalc

Retinal illuminance (troland) calculator

Enter the luminance of the scene, the pupil diameter and the optical density of a neutral filter to get the pupil area, the retinal illuminance in trolands and in lux, and the change when the pupil is small or large.

Updated on
Your inputs
cd/m²

Value out of range

mm

Value out of range

Value out of range

Results

Retinal illuminance with the filter

1,256.6 td

A bright, daylight level of retinal illumination
Area of the pupil
12.57 mm²
Retinal illuminance without a filter
1,256.6 td
Illuminance on the retina (reduced eye, f = 17 mm)
4.3482 lux
Trolands with a 2 mm pupil
314.2 td
Trolands with an 8 mm pupil
5,026.5 td

The retinal illuminance calculator gives the retinal illuminance in trolands and in lux from the luminance of a scene, the pupil diameter and the density of a neutral filter.

How the calculation works

  • Enter the luminance in candela per square meter.
  • Enter the pupil diameter and the filter density.
  • Read the trolands and the lux.

Example

A scene of 100 cd/m² seen through a 4 mm pupil, an area of π × 4² / 4 = 12.57 mm², gives 100 × 12.57 = 1,256.6 td. If the pupil narrows to 2 mm, the value is 314.2 td, and at 8 mm it is 5,026.5 td. The illuminance on the retina is the troland value divided by 17² = 289, about 4.3482 lux when there is no filter.

Why it matters

The calculator helps vision science and optometry students, researchers who design stimuli, display engineers and photographers who compare the effect of the pupil and of filters on the light reaching the eye.

Good to know

The troland has no direct link to the lux on the retina unless a model of the eye is used, and the conversion here uses a reduced eye with a focal length of 17 millimeters, which gives about 0.0035 lux per troland, so the number is an estimate. The pupil diameter itself depends on the luminance, the age, the field size and the adaptation, from about 2 millimeters in bright light to 7 or 8 in the dark, and decreases with age. The luminance of a surface is its illuminance times its reflectance divided by pi for a diffuse surface. A neutral density filter of density 1 reduces the light to a tenth. The troland value helps to predict whether vision is in the rod, mixed or cone range, but the border depends on the wavelength: the scotopic troland uses a different luminous efficiency curve from the photopic one used here. Use a calibrated photometer for real measurements.

The Hofstetter calculator treats accommodation, the contrast sensitivity calculator links luminance to contrast, the low vision calculator treats magnification and the visual acuity calculator converts notations.

Frequently asked questions

What is a troland?

A troland is a unit of retinal illuminance equal to a luminance of 1 candela per square meter seen through a pupil of 1 square millimeter. It takes the pupil into account, because the pupil controls how much light reaches the retina.

Why use trolands and not just luminance?

Two people looking at the same screen have different retinal illuminance if their pupils differ. Studies of vision that must compare stimulus levels across observers and conditions, therefore, state the stimulus in trolands.

Does the formula include the Stiles-Crawford effect?

No. Light entering near the edge of the pupil is less effective than light through the center, which reduces the effective area at large pupils. The troland ignores this and the losses in the eye media.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.