Skip to content
Omnikalc

PET standardized uptake value (SUV) calculator

Enter the activity concentration measured in a region, the injected dose, the time since injection, the body weight and height and the sex to get the SUV normalized to body weight, the lean body mass and the SUV normalized to lean body mass (SUL).

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
kBq/mL

Value out of range

MBq

Value out of range

min

Value out of range

min

Value out of range

kg

Value out of range

cm

Value out of range

Results

SUV normalized to body weight

3.32

Above the threshold of 2.5 often used in practice
Injected activity corrected for decay
253.3 MBq
Lean body mass (James formula)
56.5 kg
SUV normalized to lean body mass (SUL)
2.68
Decay factor
0.6846

The PET SUV calculator gives the standardized uptake value of a region from the activity concentration, the injected dose corrected for decay, the body weight and the lean body mass.

How the calculation works

  • Enter the activity concentration, the injected activity and the uptake time.
  • Enter the half-life, the weight, the height and the sex.
  • Read the SUV, the decay-corrected dose and the SUL.

Example

A region with 12 kBq/mL is measured 60 minutes after an injection of 370 MBq of fluorine-18. The decayed activity is 370 × exp(−ln 2 × 60 / 109.77) = 253.3 MBq. In a patient of 70 kg, the SUV is 12 / (253.3 × 1000 / 70 000) = 3.32. With a lean body mass of 56.5 kg, the SUL is 2.68.

Why it matters

The calculator helps nuclear medicine physicians, technologists, medical physicists and students who learn quantitation, and researchers who compare scans from different centers.

Good to know

The SUV depends on many technical factors: the uptake time, the blood glucose level, the reconstruction settings, the region of interest definition and the calibration of the scanner and of the dose calibrator. Comparisons between scans are only valid when the protocol is the same, and a change of SUV of less than about 20 to 30 percent may be within the repeatability. Maximum SUV in a single pixel, mean SUV and peak SUV are different measures that should not be mixed. A threshold such as 2.5 is a rough convention, not a diagnosis, because inflammation and some normal tissues also take up FDG. The formula treats a kBq/mL as equal to a kBq/g, which assumes a tissue density of 1 g/mL. Always interpret the SUV in the clinical context.

The draw volume calculator prepares the injected dose, the lean body mass calculator gives the body composition, the effective half-life calculator treats clearance and the radioactive decay calculator handles the decay correction.

Frequently asked questions

What is the SUV?

The standardized uptake value is the activity concentration in a region divided by the injected activity per unit of body weight. A value of 1 means that the tracer is spread evenly in the body. It is a semi-quantitative index used in oncology.

Why correct for decay?

The measured concentration is taken at the scan time, while the injected activity was measured earlier. The activity must be decayed to the same time. For fluorine-18 the half-life is 109.77 minutes, so after an hour about a third has decayed.

Why use lean body mass?

Fat takes up little FDG, so the SUV normalized to body weight rises with the weight of the patient. Normalizing to lean body mass (SUL) reduces this bias and is recommended in response criteria such as PERCIST.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.