Skip to content
Omnikalc

Potassium deficit and replacement infusion time calculator

Enter the serum potassium, the target, the weight, the deficit per kilogram for each millimole per liter and the maximum infusion rate to get the estimated deficit in millimoles, the grams of potassium chloride, the volume at 40 mmol/L and the hours of infusion.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
mmol/L

Value out of range

mmol/L

Value out of range

kg

Value out of range

mmol/kg

Value out of range

mmol/h

Value out of range

Results

Estimated potassium deficit

210 mmol

Moderate hypokalemia (2.5 to 2.9 mmol/L): replacement and a search for the cause are needed
Potassium chloride (KCl) needed
15.7 g
Volume of fluid at 40 mmol/L
5.3 L
Hours of infusion at the maximum rate
21.0 h

The potassium deficit calculator gives the estimated deficit in millimoles, the grams of potassium chloride, the volume of fluid at a safe concentration and the hours of infusion, from the serum potassium, the target, the weight and the rate.

How the calculation works

  • Enter the serum potassium, the target and the weight.
  • Enter the deficit per kilogram and the maximum rate.
  • Read the deficit, the volume and the time.

Example

A patient of 70 kg has a potassium of 2.8 mmol/L and the target is 3.8. The fall of 1.0 mmol/L at 3 mmol/kg gives a deficit of 210 mmol, or 15.7 g of KCl. At 40 mmol/L this is 5.2 L of fluid, and at 10 mmol/h it would take 21.0 hours, so it is given in parts with repeated checks.

Why it matters

The calculator helps nurses, physicians, pharmacists and students who treat hypokalemia in the emergency department, the ward and the intensive care unit, and want a quick estimate of the amount and the duration.

Good to know

Potassium is mostly inside the cells, which is why the deficit is large compared with the blood level. The estimate of the deficit is rough and varies with the cause: loss from the gut or the kidneys, a shift into the cells with insulin or alkalosis, or a low intake. A shift needs little replacement, as the potassium returns when the cause is treated, and a total body loss needs much more. Giving too much too fast can cause hyperkalemia and arrhythmia, particularly in patients with kidney failure, so the amount is limited and the level is checked every few hours. One gram of potassium chloride gives 13.4 mmol of potassium. Oral replacement with tablets or syrup is preferred when the patient can swallow and the level is above 2.5 mmol/L, since it is safer. The cause is looked for, including drugs such as diuretics, vomiting, diarrhea and low magnesium. This calculator is educational and does not replace the protocol of the unit.

The pulse pressure variation calculator guides fluids, the parenteral nutrition calculator plans feeding, the refeeding risk calculator flags the risk of a drop in potassium during feeding and the sodium correction calculator handles another electrolyte.

Frequently asked questions

How is the potassium deficit estimated?

Only 2 % of the body potassium is in the blood, so the serum level is a poor guide. As a rough rule, a fall of 1 mmol/L corresponds to a total deficit of 200 to 400 mmol in an adult, or about 3 to 5 mmol per kilogram.

How fast can potassium be given?

In a peripheral vein usually up to 10 mmol per hour at a concentration of no more than 40 mmol/L, because of the pain and the damage to the vein. Higher rates up to 20 mmol/h are given through a central line with ECG monitoring.

Is the whole deficit given at once?

No. Part of it is given, the level is checked again, and the dose is adjusted. Magnesium must be corrected too, since low magnesium makes the potassium hard to correct.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.