Skip to content
Omnikalc

Bretschneider quadrilateral area calculator

Enter the four sides of a quadrilateral and two opposite angles to get its area, the perimeter, the largest area possible with these sides and how far the shape is from a cyclic quadrilateral.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

ft

Value out of range

ft

Value out of range

°

Value out of range

°

Value out of range

Results

Area

284.79 ft²

Largest area with these sides (cyclic quadrilateral)

303.00 ft²

Share of the maximum area
94.0 %
Perimeter
71.00 ft
Sum of the two opposite angles
140.0 °
Deviation from a cyclic quadrilateral (180° − sum)
40.0 °

The Bretschneider quadrilateral area calculator gives the area of any convex quadrilateral from its four sides and two opposite angles, with the perimeter and the largest area possible with the same sides, reached by the cyclic quadrilateral.

How the calculation works

  • Enter the four sides a, b, c and d in order around the shape.
  • Enter the angle between a and b and the opposite angle between c and d.
  • Read the area, the maximum and the deviation from the cyclic case.

Example

A quadrilateral with sides of 20 ft, 16 ft, 22 ft and 13 ft and opposite angles of 60 ° and 80 ° has a perimeter of 71.00 ft and an area of 284.79 ft². The two angles add up to 140.0 °, which is 40.0 ° from a cyclic shape. The greatest area for these sides is 303.00 ft², so the shape has 94.0 % of it.

Why it matters

The calculator helps surveyors, builders, gardeners and students who measure an irregular plot or panel with four sides and two angles, and who need its area, or want to see how far a shape is from the largest area those sides can enclose.

Good to know

Name the sides in order around the shape and take the angles at opposite corners: the first between sides a and b, the second between sides c and d. The sides and angles must describe a real quadrilateral, otherwise the expression under the root is negative and the calculator shows an area of zero. Measure angles carefully since the area is sensitive to them near the cyclic case. For plots with a diagonal measured, two triangles with Heron’s formula give an exact result.

The cyclic quadrilateral calculator treats the maximum case, the triangle calculator handles Heron’s formula, the Pick theorem calculator counts on a grid and the trapezoid calculator treats a special case.

Frequently asked questions

What is Bretschneider’s formula?

Bretschneider’s formula gives the area of any convex quadrilateral from its four sides a, b, c, d and two opposite angles α and γ: K = √((s − a)(s − b)(s − c)(s − d) − abcd × cos²((α + γ) / 2)), where s is the semi-perimeter. It generalizes Brahmagupta’s formula for cyclic quadrilaterals.

How does it relate to Brahmagupta’s formula?

When the two opposite angles add up to 180 degrees, the quadrilateral can be inscribed in a circle and the cosine term is zero, so the area is √((s − a)(s − b)(s − c)(s − d)). For any other angles the area is smaller, which makes the cyclic quadrilateral the one with the greatest area for given sides.

Why are four sides not enough?

A quadrilateral is not rigid: with fixed side lengths, it can flex and change its area. The extra data fixes the shape. Two opposite angles do it, or one diagonal, or one angle together with the sides in a triangle decomposition. The formula uses the sum of two opposite angles.

Does it work for a non-convex quadrilateral?

The formula applies to a simple convex quadrilateral. For a concave one, the angle at the reflex vertex has to be taken as its interior value above 180 degrees, which this calculator does not allow, so split the shape into two triangles instead and add their areas.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.