Skip to content
Omnikalc

Annulus area calculator: area of a ring between two circles, width, volume and circumferences

Enter the outer and inner diameters and a thickness to get the area of the annulus, its width, its volume and the circumferences.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

Results

Area of the ring (annulus)

62.83 in²

Width of the ring
2.00 in
Volume of the ring
31.42 in³
Outer circumference
37.70 in
Inner circumference
25.13 in
Mean circumference
31.42 in

An annulus is the ring between two circles that share a center, like a washer, a pipe wall, a running track or a CD. The annulus area calculator gives the area, the width, the volume for a given thickness and the outer, inner and mean circumferences from the two diameters.

How the calculation works

  • Enter the outer diameter and the inner diameter of the ring. For a washer, a pipe or a flange these are the two diameters of the circle.
  • Enter the thickness or the length of the part if you want its volume.
  • The area of the annulus is A = π × (R² − r²), the difference of the areas of the outer and the inner circles.
  • The calculator also gives the width of the ring, the volume (area × thickness) and the outer, inner and mean circumferences.

Example

A washer has an outer diameter of 12 in, an inner diameter of 8 in and a thickness of 0.5 in. The radii are 6 and 4 in. The area is π × (36 − 16) = 62.83 in². The width is 2.00 in. The volume is 62.83 × 0.5 = 31.42 in³. The outer circumference is 37.70 in, the inner one is 25.13 in and the mean one is 31.42 in, so the area is also the mean circumference times the width.

Why it matters

The calculator helps students, machinists, designers and DIY people to find the area of a washer, a flange, a pipe wall, a round pool deck or a garden ring path, and the material needed. It saves the two area computations and the subtraction, and the volume output is useful for the weight of a part.

Good to know

The calculator assumes that the circles are concentric and perfectly round. For a ring that is not concentric, the area is the same, but the width varies. For a pipe, use the outer and the inner diameters, and not the nominal size. Units must be the same for all the entries. If you need a square or rectangular frame, use the area of the outer shape minus the area of the inner shape.

The circle calculator gives the area and the circumference of a disk, the ellipse calculator handles oval shapes, the circular segment calculator handles part of a circle, and the polygon area calculator handles flat shapes with straight sides.

Frequently asked questions

What is an annulus?

An annulus is the region between two concentric circles, that is circles with the same center. It looks like a ring, a washer or the cross section of a pipe. Its area is the area of the outer circle minus the area of the inner circle, which is π (R² − r²) where R and r are the outer and inner radii.

Is there a simple way to remember the area?

The area of an annulus is equal to the width of the ring times the circumference of its middle circle: A = 2 π × ((R + r) / 2) × (R − r). This is the same as π (R² − r²), and it shows that you can unroll the ring into a strip with the length of the mean circumference and the width of the ring.

How is the volume of a washer or a pipe wall found?

Multiply the area of the annulus by the thickness of the washer, or by the length of the pipe. For a pipe, the area is that of the cross section of the wall, and the volume is the amount of material in the pipe, which gives its weight when multiplied by the density of the metal or the plastic.

What if the inner diameter is larger than the outer one?

The geometry is not valid, since the inner circle must lie inside the outer one. The calculator then limits the inner diameter to the outer diameter and shows a ring of zero area. Check the two values if the result is zero. A hole with a zero diameter gives the full disk.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.